VW Golf Atomic Enclosure

[double 07 10+ year member]

This is going to house two Atomic 8s....1.5 cubes net....34hz....Kerf port...going to be double flush baffled...back baffle is NOT in place yet....

Click to read more...

 

[jockhater2 10+ year member]

how do you kerf the port like that?

 

[double 07 10+ year member]

how do you kerf the port like that?

Magic!!!!!!..........actually you make several cuts about 1/4" to 1/2" almost through the wood...leave about 1/16" of material and be REALLY CAREFUL in handling it afterwards....

 

[jockhater2 10+ year member]

Magic!!!!!!..........actually you make several cuts about 1/4" to 1/2" almost through the wood...leave about 1/16" of material and be REALLY CAREFUL in handling it afterwards....

wow. that is really cool. and sounds really tricky.

you are very skilled

 

[double 07 10+ year member]

Thanks....

 

[sbelew 10+ year member]

Curious on how you measure the length of a kerfed port. Does the measurement stop at the point the kerf starts or does the measurement go out to the end of the port wall on the left?

 

[AnthonyO 10+ year member]

I wonder who the lucky guy is thats getting this enclosure.....//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[double 07 10+ year member]

That depends on how large the radius is.....Like on the above enclosure the KERFED section is about 5 1/4" wide...

 

[sbelew 10+ year member]

Lower the tuning down to about 28 Hz and I could drop my GTO804's right into that cool looking enclosure

 

[AnthonyO 10+ year member]

I forgot to tell you. please no speaker terminal

 

[double 07 10+ year member]

ok......You want a pair of Brass Binding posts instead?

 

[AnthonyO 10+ year member]

ok......You want a pair of Brass Binding posts instead?

No, plan on using threaded rod. Running 4 gauge to the enclosure, 4 gauge inside to a distribution and 8 gauge out to the subs. A little overkill, I know...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[double 07 10+ year member]

No, plan on using threaded rod. Running 4 gauge to the enclosure, 4 gauge inside to a distribution and 8 gauge out to the subs. A little overkill, I know...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Aight....no cups...no posts.....

 

[AnthonyO 10+ year member]

Aight....no cups...no posts.....

Correct. I will be doing this

minus the piece of peel and seal stuck to the box...lol

 

[AnthonyO 10+ year member]

[quote name='sbelew']Lower the tuning down to about 28 Hz and I could drop my GTO804's right into that cool looking enclosure[/QUOTE]


Shoot @double 07 ; a pm. You would be surprised at his inexpensive pricing