viper 12.1

[xDeadHeadx 10+ year member]

i have 2 ss rl-p 15 's in a seals box wired at 1 ohm

my box only has one output terminal but my viver 12.1 has 2 speaker terminals should i drill a hole in my box and use both terminals or is it the same power wired either way?

Click to read more...

 

[stones 10+ year member]

Word that a little better/ describe a little better.

I'm not sure what you are saying.

If its wired at 1ohm why would you need to drill holes for new connections?.

 

[chinny 5,000+ posts]

The viper 12.1 has 2 sets of terminal for eeezzz of use, just incase you have 2 subs you can hook them up easily, if you have one just use one + and one -

 

[PhatTonyDeMarco 5,000+ posts]

Just bridge the amplifier.. If the speakers are wired to 1 ohm, then you will get ~600w per sub.

 

[chinny 5,000+ posts]

Just bridge the amplifier.. If the speakers are wired to 1 ohm, then you will get ~600w per sub.

No, the Viper 1200.1 has 2 sets of terminal for eez of connection, if you only have one sub then just use one + and one - and if you have 2 subs then use both, its the same as the brutus line in hifonics.

 

[DBfan187 5,000+ posts]

No, the Viper 1200.1 has 2 sets of terminal for eez of connection, if you only have one sub then just use one + and one - and if you have 2 subs then use both, its the same as the brutus line in hifonics.

Ummm, you can just use 1 set then wire the subs in parallel for 1ohm.

 

[chinny 5,000+ posts]

Ummm, you can just use 1 set then wire the subs in parallel for 1ohm.

Yeah thats what i ment //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Vega 10+ year member]

I have a question about this also. I have the same Viper amp with only one sub right now but when I get my second sub I know the box will have the two subs (which are dual 4's) seperated which stops me from wiring them together to get 1 ohm. If I wire both subs to 2 ohms and put on sub on each wiring of the terminals what ohm load will it be to the amp? I need it to be 1 ohm and the box if pre-fab that why I'm sure the subs will be seperated.

 

[bonesninja 5,000+ posts]

I have a question about this also. I have the same Viper amp with only one sub right now but when I get my second sub I know the box will have the two subs (which are dual 4's) seperated which stops me from wiring them together to get 1 ohm. If I wire both subs to 2 ohms and put on sub on each wiring of the terminals what ohm load will it be to the amp? I need it to be 1 ohm and the box if pre-fab that why I'm sure the subs will be seperated.

it will be 1 ohm.

 

[Vega 10+ year member]

OK thanks