*video-sketchup* (2) 18's walled in 2dr blazer

[SHiZNiLTi 10+ year member]

Im going to be building this 16cuft box in the next few days that will fill the rear cargo section of my blazer from top to bottom that will be completly walled off.

I change the angle of my rear seats alowing me to get 37" from rear hatch to back of rear seats with still having clearance for the port and subs.

Im going to build this design before the 6th order....

http://www.caraudio.com/forum/showpost.php?p=3093060&postcount=33

With this design it's allowing me to keep an option of folding my rear seats up when I have 3 passengers ...



Port is 35.5 "x 6" x 25" deep.

Box is 37" x 30" x 34" deep.

Let me know what you think.

Click to read more...

 

[BlackRadon]

WoW, thats huge.

 

[Skip01 5,000+ posts]

No way thats only 16cu......look at it compared to a human:graduate:

Good Luck

 

[jmoneypierce21 10+ year member]

This is gonna be loud as sh** i like the 6th order design better but id go with this one so you not limited to a 2 seater. Lovin it man!

 

[SkatinBassPLaya]

lol you made a nice edited vid about your upcoming project. Thats cool. Your myspace is too materialistic if you ask me

 

[SHiZNiLTi 10+ year member]

No way thats only 16cu......look at it compared to a human:graduate:
Good Luck

LOL, gotta love building in feet instead of inches.

BTW, I'm still gonna build the 6th order, but plan on building this 1st since its much more of a practical design for a daily driver.

 

[BassAce 10+ year member]

That looks pretty nice.

 

[theothermike 10+ year member]

space between subs looks little thin, might want to high corner one and low corner another. but man that sick

 

[SHiZNiLTi 10+ year member]

space between subs looks little thin, might want to high corner one and low corner another. but man that sick

Ya it's gonna be close with each sub outer mounting dims at 18.5" it's REAL close. I'll probably end up mounting them offset.

I also forgot to mention that I plan to use all-thread bracing front to back, side to side ann top to bottom. The front will be a double baffle and the subs will be flush.

 

[na_rsx 10+ year member]

i would assume the little stick figure guy that was in the corner was you, if the box is that big, i dont think king kong could fit in there lol.

looking forward to the completed project.

 

[Wkbdkid 10+ year member]

Looks like it'll be sweet. Ive thought bout doing the same kinda wall in my explorer.

 

[99gtxgolfer 10+ year member]

nice man thats gunna be tight

 

[SHiZNiLTi 10+ year member]

Below is a video of the bracing that I plan to do.

I'm either going to use 3/4" metal all-thread or 1.5" wooden dowels. All thread is the best way to go I've heard, but I've also had really good luck using dowels in the past.

Let me know what you think...



Thanks!

 

[SHiZNiLTi 10+ year member]

Home Depot has 3/4" 11ply BIRCH or 3/4" MDF.

Which should I get?

 

[oglejust 10+ year member]

birch is easier to work w/ + it looks better imo.. theres only 1 side effect to it, its expensive