Well it took me a few mnths to scrape the cash together had to buy all this piece by piece, wondering if I am going in the right direction and if I have made the right choices. Keep in mind I listn to metal more than rap so I chose to do this build..
Front stage
HU- 9885
SPX-17PRO
6-1/2" Component 2-Way Speaker
Powered- PDX-2.150 2/1 Channel Power Density Digital Amplifier
tweets are flush mounted in pillars for nice clean look without that black ring outlineing them, looks sick, mounted x-overs in each kick panel at feet.
Middlestage-
SPR-57C
5x7" Coaxial 2-Way Speaker
powerd-PDX-2.150
Sub set up
2-- SWR-1222D
12" Subwoofer (2Ω + 2Ω)
powered- PDX-1.1000 • Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass--Per channel into 2 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1
• Per channel into 4 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1
Mono Power Density Digital Amplifier
Sealed Box
Adding a 3rd 12 in a few weeks , but over all im stoked and hope to have made the right buys .. will post some pics
Front stage
HU- 9885
SPX-17PRO
6-1/2" Component 2-Way Speaker
Powered- PDX-2.150 2/1 Channel Power Density Digital Amplifier
tweets are flush mounted in pillars for nice clean look without that black ring outlineing them, looks sick, mounted x-overs in each kick panel at feet.
Middlestage-
SPR-57C
5x7" Coaxial 2-Way Speaker
powerd-PDX-2.150
Sub set up
2-- SWR-1222D
12" Subwoofer (2Ω + 2Ω)
powered- PDX-1.1000 • Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass--Per channel into 2 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1
• Per channel into 4 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1
Mono Power Density Digital Amplifier
Sealed Box
Adding a 3rd 12 in a few weeks , but over all im stoked and hope to have made the right buys .. will post some pics
