vertical wedge enclosure

[Dre20xl 10+ year member]

Everyone has seen a sealed wedge enclosure with the subs beside each other horizontally but, is it possible to have a sealed wedge enclosure with the subs on top of each other vertically?

Click to read more...

 

[Skip01 5,000+ posts]

Thats how they normally are:

 

[Dre20xl 10+ year member]

so if i had a big triangle with 2 12s on the left and right side it would be okay.

 

[snoopdan 5,000+ posts]

well with just two subs you're going to have a certain amount of cancellation.... the reason why cancellation on setups with 20 10's and the like is sheer force of surface area involved.

 

[Dre20xl 10+ year member]

I'm not doing 2 subs i'm going with 4 12s, 2 on the right and 2 on the left. Would cancellation still be an issue? If it is still going to be problem, is there any other way to fit 4 12s in a hatch area that's 36 inches wide. I don't want them to fire up, forword or directly to the side.

 

[snoopdan 5,000+ posts]

nah sounds like you're out of room bro

 

[assman 10+ year member]

Another type of wedge

 

[Dre20xl 10+ year member]

so a V shaped enclosure with the subs on the inside of the V wouldn't work ether? do all the set ups y'all showed me so far work cause of the number subs, i'm sorry i'm just not getting it.