USAmps MD1D

[Puggsley456 10+ year member]

I know that his amp has 0 gauge power and ground inputs but would 4 Gauge be ok? I plan on running 0 Gauge from my battery to my 2 farrad capacitor(uses bus bars). And then 4 gauge from there to my two amps, the MD1D and the PG ti600.2.

The 4 guage run would be less than 4 feet. And it is Kicker wire throughout.

Any thoughts?

Click to read more...

 

[Puggsley456 10+ year member]

Anyone?

 

[Flipx99 5,000+ posts]

It may be okay, but I would try to buy the 4 foot off someone to be sure.

Why be worried when you can get the 4" of 0/1 for maybe $15.

 

[Puggsley456 10+ year member]

It may be okay, but I would try to buy the 4 foot off someone to be sure.
Why be worried when you can get the 4" of 0/1 for maybe $15.

Well the problem I am going to have is.....my capacitor is going to be my distro block. And I dont know that I can fit a 0gauge wire and a 4 gauge wire both in there at the same time.

 

[Flipx99 5,000+ posts]

Can you use ring terminals?

 

[Puggsley456 10+ year member]

Can you use ring terminals?

No because I want to keep the bus bars that my cap has on there. Heres a pic of the way it is now. And those wires on the cap are one 4 gauge one 8 gauge.