chinny
5,000+ posts
Banned
im feeling a change also //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
Ya, it sounds like one hell of a driver, i'm going to need to get a couple when i get the money.this is all i want. exactly what i want. exactly. what. i want.
I was thinking Adire/CSS FR125s (sp?), the 60-20K 4.5" speakers, matched with Aura RPM 10s in kicks, and maybe have Ology take care of the crossover network. Maybe Shiva 12s crossed over to 450 matched with the FRs...im feeling a change also //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
Those FR125s beam nicely .. I'd consider a super tweeter //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif unless you can angle them both right at your head (screw the passenger in the front seat //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif lol)I was thinking Adire/CSS FR125s (sp?), the 60-20K 4.5" speakers, matched with Aura RPM 10s in kicks, and maybe have Ology take care of the crossover network. Maybe Shiva 12s crossed over to 450 matched with the FRs...
Like I said, radical. //content.invisioncic.com/y282845/emoticons/satan.gif.9c6a335ed7aeeed3ee273e573f1fcaac.gif
since were talkin about it. is there anymore info?By 6.5s I mean the OlogyAudio XBL^2 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Excelsior... Think Lambda Acoustics motor -- with the whole XBL^2 thing -- paper -- 11.8 mm of xmax -- paper cone -- phase plug -- high power handling -- figure like 150 watts continuous... Trying for a well behaved FR upto 10khz but we will see when they get measured if they hit that goal... DVC 4 ohm (sexy for both home and car audio) -- oh yea... and 94dB/w efficient... yea I do mean WATT not 2.83V -- thats about 101dB/2.83V FYI @ 2 ohm (~4 watts) -- Very low inductance... very low... I'll leave it there for now... Let just say if it comes out as speced it will be one of the best midranges on earth and it will take a little while for us to best it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
It's been my goal to get full range with two drivers in the front of a vehicle. If I had the ability to make a driver the same way you can, I would ultimately make a component set with an 6 or an 8 and a nice tweeter that would play flat 20k to 30hz. Before you ask how, just know nowhere in that did I say it would be efficient. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif An 83dB efficient comp set that you need at least 250rms per side to get moving, but wouldn't have to worry about subwoofers. =pThose FR125s beam nicely .. I'd consider a super tweeter //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif unless you can angle them both right at your head (screw the passenger in the front seat //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif lol)I'd also consider an active transition between the auras and CSS... because its better in this case //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif -- granted I dont get to make any money //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif but yea... it is generally a better idea to run things active that low... parts values get huge and expensive in a hurry... not to mention its nice to tweak how much bass-midbass you are getting to taste //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif