Two XX-Hercules, but how?

[Ali1 10+ year member]

How do i hook up a pair of XX-Hercules without strapping them? I currently have one XX-Hercules hooked up, but i plan on hooking another. Basically, running an amp to each R.

What about the remote wire that's going from my HU to the current Hercules. Would i need to splice the main wire at the end into two short wires running to both amps OR can i run two wires from the HU to both amps by splicing the wires at the HU?

Specifically, how do i hook up the current RCA cable to both of these amps?

As for the power and ground, i would have to use DISTRO-BLOCKS, is that correct?

Click to read more...

 

[JoshHd6 10+ year member]

wat an idiot...

 

[phantom240 5,000+ posts]

x2

 

[mackin13 10+ year member]

your type r's arent going to be around for much longer, are they?

 

[matrxx dude 5,000+ posts]

Specifically, how do i hook up the current RCA cable to both of these amps?

come off your first herc outputs rca's to your second herc input rca's,and i would strap them.just jump remote from 1 amp to the other.

 

[Ali1 10+ year member]

Why you guys calling me an Idiot?

just wanna make sure i confirm everything before i do any work......

 

[Ali1 10+ year member]

Specifically, how do i hook up the current RCA cable to both of these amps?

come off your first herc outputs rca's to your second herc input rca's,and i would strap them.just jump remote from 1 amp to the other.

So i would still use one run of RCAs? one of the sides go into the output of the 1st amp, the other side of the RCA go into the input of the second amp?

As for the remote wire, i could keep the current remote the way it is, then add a short wire from the remote terminal on the current amp to the new amp?

thanks for helping

 

[budahbuddy803 10+ year member]

you got it

 

[matrxx dude 5,000+ posts]

So i would still use one run of RCAs? one of the sides go into the output of the 1st amp, the other side of the RCA go into the input of the second amp?

you plug in the rca's from your hu to the inputs of the first amp,then you get a second set of short rca's and come out of your first amps outputs to your second amps inputs.

 

[Ali1 10+ year member]

So i would still use one run of RCAs? one of the sides go into the output of the 1st amp, the other side of the RCA go into the input of the second amp?

you plug in the rca's from your hu to the inputs of the first amp,then you get a second set of short rca's and come out of your first amps outputs to your second amps inputs.

sounds good, where can i get a short set of RCA wires?

 

[matrxx dude 5,000+ posts]

your local wal-mart or car audio store

 

[Ali1 10+ year member]

http://www.knukonceptz.com/productDetail.cfm?prodID=KLA-1M

this would be the shortest?

 

[Ali1 10+ year member]

....

 

[Supergumby5000 5,000+ posts]

sure? its not too hard bud, just whatever iwll be long enough to go from one amp to the other. Just make sure its not too short

 

[Ricky616 10+ year member]

http://www.knukonceptz.com/productDetail.cfm?prodID=KLA-1M

this would be the shortest?

yes that should work.