Tuning a RF Power T10001bd for a 15" Axis

[da box king 10+ year member]

My buddy is throwin it in tonight. He's using the T10001bd. Box is 4 cubes tuned to 35hz for the 15" AP axis. The birthsheet read about 1600 rms @ 2ohm

Need some input for tuning the amp, what should the settings be around just to make sure?

Click to read more...

 

[da box king 10+ year member]

ANYONE.....geez

 

[dragnix 5,000+ posts]

settings? what settings?

 

[da box king 10+ year member]

settings? what settings?

hell I don't own the amp....prolly lpf, subsonic, etc?

 

[dragnix 5,000+ posts]

then just go with the typical settings, 80 for LPF, SS at around 25. Depending on box build though

 

[da box king 10+ year member]

then just go with the typical settings, 80 for LPF, SS at around 25. Depending on box build though

box is 4 cubes tuned to 35hz

goin in a trunk car pointing toward the cab

 

[Notloud00 10+ year member]

turn the ssf on and put the low pass at about 50 hz. if u turn it over that u get nasty voices thru the sub and the bass is like half midbass and it blows.

 

[elite08 10+ year member]

Turn it all down to 0. And then turn on a song with some steady notes at a listening volume that he might use the most. And Adjust from there.