Tsunami 1400 watt amp-48 install kit no 1.2 farad cap

  • 3
    Participant count
  • Participant list

wirenut495
10+ year member

wirenut495
Includes:

two 16 foot clear blue twisted pair with foil wrap rca

17 foot 4 gauge clear blue tinned power cable

3 foot 4 gauge clear silver ground cable

8 foot 8 gauge clear blue power cable

8 foot 8 gauge clear ground cable

40 feet 16 gauge clear blue square speaker wire for front/rear speakers

3 foot 12 gauge clear speaker wire for woofer speaker

18 feet 18 gauge blue amplifier turn on wire

bright nickel (1) 4 gauge input (1) 4 gauge output angle fuseholder with 100 amp fuse with BLUE DISPLAY VOLTAGE METER BLOCK AGU

bright nickel (1) 4 gauge input (2) 8 gauge output agu fuseholder with (2) 60 amp nickel AGU fuses

bright nickel POS/NEGATIVE distribution block each side with (1) 4 gauge input and (2) 4 gauge output

bright nickel GROUND distribution block 1/0 or 4 gauge input (2) 4 gauge and (3) 8 gauge output

2 four gauge bright nickel L type grounding rings

2 four ga nickel 5/16 heavy duty ring termminals

14 eight inch black wire ties

four 8 gauge spade terminals bright bickel with 2 blue 2 silver covers

four 12 gauge spade terminals with covers

eight 16 gauge spade terminals with 4 silver, 4 blue covers

2 battery trminals, 1 positie, 1 negative with 2 four gauge 2 eightgauge output bright nickel

12 6 3/4 inch philips pan head screws in black oxide

6 6/34 philips pan head screws in black oxide

View attachment 26524348

$ 95.00 shipped

 
it was purchased for an install in my 2005 SS my oldest son was building a system at the time,

and the wife hit me with "hey guess we are gonna have in 9 months"

he needed the cap so i let him have it if i am asking too much (95.00 for a 349.00 system missing the cap) make me an offer

worst thing i can say is "NO"

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

He wants to strap the amps to double the output to one sub. Some amps allow you to "couple" them. This allows you to wire up the one sub powered...
5
1K
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
Thanks man I’ll give it a try I’m usually pretty bad at this kind of stuff. I wasn’t sure if there was a website or something that had a picture I...
2
1K

About this thread

wirenut495

10+ year member
wirenut495
Thread starter
wirenut495
Joined
Location
Pittsburgh PA
Start date
Participants
Who Replied
Replies
4
Views
801
Last reply date
Last reply from
wirenut495
1714321195129.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0
1714321134050.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0

Latest topics

Top