Truck = No Room:(

[badandyturbo 10+ year member]

I have a 2003 Ford F150 SuperCrew. It has zero space behind the back seat and I don't want to do a blow threw b/c I don't want to hack up the cab. Do you guys have any suggestions.

Click to read more...

 

[badandyturbo 10+ year member]

The back seat literaly rests against the back wall of the cab. I may just have to remove it completely.

 

[badandyturbo 10+ year member]

Haha I know I had removed the entire seat in my last truck and ran that sealed box with the 4 12" MMATS. But now I want the bass and my back seat....Maybe I will do a blow threw, the bed is alreag hacked up from the air bags.

 

[acold7dusta 10+ year member]

take out one of the sections of seats back there, and put the box there so youll have 1-2 people to sit back there, and the box will be on the left, middle, or right

 

[badandyturbo 10+ year member]

Yeah I guess the back bench is a 60/40 split. I could remove the 40% and put the box there....Now to get rid of my 4 12's for 1 15"....

 

[audiobahnuser18 5,000+ posts]

do something where u can make an enclosure maybe a small 8 or 12 if you could fit it. fit that into a panel

 

[ultimate157 5,000+ posts]

Yeah I guess the back bench is a 60/40 split. I could remove the 40% and put the box there....Now to get rid of my 4 12's for 1 15"....

That sounds like a great plan right there. I'd love to see pics of it when you're finished.

do something where u can make an enclosure maybe a small 8 or 12 if you could fit it. fit that into a panel

...What?

 

[fox_forma 10+ year member]

what about something like this? Its not a big system but should be ok

 

[GrnEydDvl 10+ year member]

There is a seat lift kit for our trucks and I plan to use that. Made by LMI Welding IIRC. Raises the rear seat by about 2 inches.

Brypink is a user here has the seat lift kit. He has a 2005 supercrew and squeezed two SI Mag's under his seat in a downfiring box. About 2.25 cuft total to work with.

I am also considering removing the 40% seat for a box. Still scheming but I am leaning towards the seat lift kit route.

Edit: Just saw yours is a 2003. I know they make a seat lift kit for it as well. Do not know how high it lifts or how much room is exactly under the seat after the lift.

 

[badandyturbo 10+ year member]

Is that exactly how your seat is?

Almost. My seat sits lower b/c its a four door. I will take some pics later to show you what I am talking about.

 

[wilzyx 5,000+ posts]

i think your best bet would be to raise the seat and put a box underneath and try to fit 2 10's down there.

 

[GrnEydDvl 10+ year member]

http://www.supercrewsound.com/shop/cat/60.htm More options / ideas. These are without a seat lift. They do not make boxes for seat lifted trucks.

 

[rocky 59 5,000+ posts]

look at the focal 5'' subs and see if you do them back there or something of that nature. you can always do a center console box and sub //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[badandyturbo 10+ year member]

http://www.supercrewsound.com/shop/cat/60.htm More options / ideas. These are without a seat lift. They do not make boxes for seat lifted trucks.

Thanks for the link. It gives me some ideas. I could also move the seat foward. Do you guys know any examples of blow threws other than that XXX chevy?

 

[mikey060 10+ year member]

x2 on doing a center console...that would be sweet. 4 8's? 2 10's? who knows