Hey guys, I am caught in a dilemma and I am looking for advice more than anything. My Alpine iDA-x305s bit the dust a few months ago and I finally got around to taking it out and putting the factory back in for the time being. Regretfully. The Hi-level input from my OEM to the MS-8 causes static at medium to high volume, I can only assume this is from the high voltage...even though JBL claims it's made for that. BUT, I kinda like that factory look in a 2011 civic, So here is my thought...
I could get a good LOC like the ISVE61 and run it to the MS-8, I assume it would cut out that pesky static, or I could get a new aftermarket HU. I'm thinking something DDIN with Sat radio. If you were in my shoes which would you do...
CURRENT:
-HU- .......
-FRONT- MB Quart PVL216
-REAR- JBL Power Series
-SUB- SSA Dcon 12
-Processor- JBL MS-8
-Amp- JBL MS-A1004 and PDX-f4
FUTURE
-HU- .......
-FRONT- Hertz HSK ..either 2 way or 3 way
-REAR- Removed
-SUB- SSA Dcon 12
-Processor- MS-8
-Amp- PDX-f4 and PDX-f6
I could get a good LOC like the ISVE61 and run it to the MS-8, I assume it would cut out that pesky static, or I could get a new aftermarket HU. I'm thinking something DDIN with Sat radio. If you were in my shoes which would you do...
CURRENT:
-HU- .......
-FRONT- MB Quart PVL216
-REAR- JBL Power Series
-SUB- SSA Dcon 12
-Processor- JBL MS-8
-Amp- JBL MS-A1004 and PDX-f4
FUTURE
-HU- .......
-FRONT- Hertz HSK ..either 2 way or 3 way
-REAR- Removed
-SUB- SSA Dcon 12
-Processor- MS-8
-Amp- PDX-f4 and PDX-f6
