Reply to thread

Message

<blockquote data-quote="All_Logix" data-source="post: 7609978" data-attributes="member: 628274">Hey guys, I am caught in a dilemma and I am looking for advice more than anything. My Alpine iDA-x305s bit the dust a few months ago and I finally got around to taking it out and putting the factory back in for the time being. Regretfully. The Hi-level input from my OEM to the MS-8 causes static at medium to high volume, I can only assume this is from the high voltage...even though JBL claims it&#039;s made for that. BUT, I kinda like that factory look in a 2011 civic, So here is my thought...I could get a good LOC like the ISVE61 and run it to the MS-8, I assume it would cut out that pesky static, or I could get a new aftermarket HU. I&#039;m thinking something DDIN with Sat radio. If you were in my shoes which would you do...CURRENT:-HU- .......-FRONT- MB Quart PVL216-REAR- JBL Power Series-SUB- SSA Dcon 12-Processor- JBL MS-8-Amp- JBL MS-A1004 and PDX-f4FUTURE-HU- .......-FRONT- Hertz HSK ..either 2 way or 3 way-REAR- Removed-SUB- SSA Dcon 12-Processor- MS-8-Amp- PDX-f4 and PDX-f6</blockquote>

[QUOTE="All_Logix, post: 7609978, member: 628274"] Hey guys, I am caught in a dilemma and I am looking for advice more than anything. My Alpine iDA-x305s bit the dust a few months ago and I finally got around to taking it out and putting the factory back in for the time being. Regretfully. The Hi-level input from my OEM to the MS-8 causes static at medium to high volume, I can only assume this is from the high voltage...even though JBL claims it's made for that. BUT, I kinda like that factory look in a 2011 civic, So here is my thought... I could get a good LOC like the ISVE61 and run it to the MS-8, I assume it would cut out that pesky static, or I could get a new aftermarket HU. I'm thinking something DDIN with Sat radio. If you were in my shoes which would you do... CURRENT: -HU- ....... -FRONT- MB Quart PVL216 -REAR- JBL Power Series -SUB- SSA Dcon 12 -Processor- JBL MS-8 -Amp- JBL MS-A1004 and PDX-f4 FUTURE -HU- ....... -FRONT- Hertz HSK ..either 2 way or 3 way -REAR- Removed -SUB- SSA Dcon 12 -Processor- MS-8 -Amp- PDX-f4 and PDX-f6 [/QUOTE]

Verification