here are a couple pictures of what i started with.
they were originally made for a set of AA poly mids so that is why they are so big.
but since i am using a set of coustic DR 5.25's they dont need to be nearly that big any more.
so onto the destruction.
they were a pain in the *** to tear apart, we had to use a combination of a sawzall, hammer and plenty of pulling to break them apart.
but i finally rescued my factory panels from the mess.
then it is time to rebuild.
unfortunately i didnt take any pics before i wrapped them but i just attached the ring to the panel with super glue and dowel rods.
then wrapped them in fleece and glued it on the back to hold it in place.
then came the glass, they got a good 2-3 layers on the whole thing.
they were plenty strong so i didnt worry about adding more.
after the glass i sanded then applied 2 layers of bondo and sanded the hell out of them.
but i dont have any pics of them finished since they are at a shop so i can get a quote on wrapping them.
i took them to 2 shops and one told me 50-70 for the pair.
and the other has them right now and will call me tomorrow with the price.
i might just wrap them myself but we'll see.
if they are cheap enough i might just let them do it.
but i will have more pics tomorrow when i get them back.
~Magick_Man~
