Thoughts on this please!

[snfsh79077 10+ year member]

Ok I now have a HC15 in my posession. I have been thinking about doing a blow through with it in my truck. Problem is I do not want to cut out the support beam so the largest the hole will be on the cab is 13" high by 42" wide(give or take a hair for fit) the box is going to be 42" wide and 16" high. I have designed a box with step down front.

I need input from those who have done blow throughs with 15s.

I also need input on this design. Will the front section act like another box? How will output be affect?

Click to read more...

 

[snfsh79077 10+ year member]

bump

 

[blackbonnie 5,000+ posts]

in your sketchup, go to file and export it as a 2d file, then save it in your pics folder, then you can go to photobucket and load it from there and post it here. that might help with people and your question

 

[snfsh79077 10+ year member]

updated with picture

 

[snfsh79077 10+ year member]

ttt

 

[audiojunky]

no

 

[snfsh79077 10+ year member]

no wat?

 

[snfsh79077 10+ year member]

up...any thoughts?

 

[snfsh79077 10+ year member]

ttt

 

[80INCHES 5,000+ posts]

it should work

just put the port on the driver side

it will gain on the tl mic

80

 

[snfsh79077 10+ year member]

I hope so...Im gonna try to have it done before the end of june so I can get it metered.