This right for strapping?

[Lowflyin 10+ year member]

View attachment 26527058

assuming a d1 sub

Click to read more...

 

[assassin1840 10+ year member]

i believe you have to have negs conneted and on your master + that will be your positive and then on your slave + will be your sub negitive from what ive been told

 

[Lowflyin 10+ year member]

But since each amp is seeing a 1 ohm load I thought u would only use the outside channels where it says "1 ohm stable"

 

[assassin1840 10+ year member]

no that doesnt matter what you should do is look at your manual and it will tell you how to strap them but im like 98 percent sure thats how you do it just look up some forums and thats how they tell you to do it

if i strap my amp and my amp is 1 ohm stable i would have to do it this way

 

[ItsAJeepThing 10+ year member]

I believe if you strap these two amps you should go to 2ohms. If the sub is seeing 1ohm load, that would mean each amp would be at .5ohm. Someone correct me if I'm wrong.

 

[Lowflyin 10+ year member]

No I meant each amp seeing a 1 ohm load, thus wiring those outside terminals . Here's fro

The ap Manuel, idk if u will be able to see it though since im on my iphone

Mobile Photobucket

 

[assassin1840 10+ year member]

yeah thats really not helping just give us the model of your amp and we can help you more

 

[ItsAJeepThing 10+ year member]

just do exactly what the ap manual says. Im guessing it will put you at a 2ohm load.

 

[vaiboy 10+ year member]

It's a mono amp there are two positive and two negative terminals but they are linked internally so it shouldn't matter which one you use.

Based on the diagram it looks like negative from amp1 to negative of amp2, then positive of amp1 to positive speaker and positive of amp2 to negative speaker.

 

[vaiboy 10+ year member]

Is your sub dual 1Ω?

 

[Lowflyin 10+ year member]

Ok thanks, so each amP will have 2 terminals with no wires? They are ap15001d amps And yes my sub is a d1

 

[assassin1840 10+ year member]

It's a mono amp there are two positive and two negative terminals but they are linked internally so it shouldn't matter which one you use.
Based on the diagram it looks like negative from amp1 to negative of amp2, then positive of amp1 to positive speaker and positive of amp2 to negative speaker.

seems like i told him that in the first place and he didnt believe me for some reason

 

[Lowflyin 10+ year member]

No need the get upset, I simply stated that on the amp itself, it says to use the outside terminals for 1ohm min. I was unsure if you could use the other terminals for a 1ohm load.

So should I connect both negatives together or just one because in the manual it only shows one connected, but on any other amp I've done both.

 

[Lowflyin 10+ year member]

Bump

 

[Lowflyin 10+ year member]

Just need to know all 4 neg connected or just 2?