THE Thread

[Acidburn 5,000+ posts]

Just accept it.

/\/3\/4|2!!

 

[spinsharp 10+ year member]

//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[cjjackson85 5,000+ posts]

 

[Beat_Dominator 5,000+ posts]

Ok, buying an amp that was made before the internet = hard to find free info //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[monte_carlo97 10+ year member]

yeap, that would ****

Any pics. What amp is it even?

 

[squeak9798 5,000+ posts]

Well my 8v preouts scare me. This thing never heard of that //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Don't worry, the amp I'm running is from the tape-deck era aswell //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Input knob only goes as high (low?) as 1500mV, but I'm running an Eclipse 8053 into it with no problems what-so-ever. I can actually turn it up to full volume with little to no clipping (not with 0db sine waves, but with regular music).

 

[squeak9798 5,000+ posts]

yeap, that would ****
Any pics. What amp is it even?

Old school carver. He just started a thread about it in the general discussion area //content.invisioncic.com/y282845/emoticons/search.gif.e79a63b2b580b39b282dff402646b704.gif

 

[Beat_Dominator 5,000+ posts]

Don't worry, the amp I'm running is from the tape-deck era aswell //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Input knob only goes as high (low?) as 1500mV, but I'm running an Eclipse 8053 into it with no problems what-so-ever. I can actually turn it up to full volume with little to no clipping (not with 0db sine waves, but with regular music).

Well when I had it in to see if it even worked, it either clipped or put out too much volume at like 2/3 of my system at normal (Eclipse 8443) normal max is around "68" when I had this amp in it was like "46". I want to try to use the high level inputs on it, just need to figure out how the 3 ports for it work.

 

[Johnny Drama 5,000+ posts]

hello

 

[Beat_Dominator 5,000+ posts]

Hiya B

 

[Johnny Drama 5,000+ posts]

no, no your B im J

you say hiya J

I say hiya B

Duhhhhhhhh

 

[Beat_Dominator 5,000+ posts]

ok //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Beat_Dominator 5,000+ posts]

On a side note to squeak.

When I was trying it out I put in Tracy Chapman's first CD and OMG did it sound good! The highs were a bit softer (good thing 'cause the Boston tweets are a wee bit harsh sometimes) and in one song the snare drum was like, perfect. I was like wtf. I thought my 80 per channel PPI was enough as I was guessing it to be much closer to 100 on 14v, but the extra 20-40 watt worked miracles on these comps I think.

 

[squeak9798 5,000+ posts]

But it works better if he says hiya B and you say hiya J.

Get it; B J

BJ

Blowjob

Ok, I'm done.

 

[squeak9798 5,000+ posts]

On a side note to squeak.
When I was trying it out I put in Tracy Chapman's first CD and OMG did it sound good! The highs were a bit softer (good thing 'cause the Boston tweets are a wee bit harsh sometimes) and in one song the snare drum was like, perfect. I was like wtf. I thought my 80 per channel PPI was enough as I was guessing it to be much closer to 100 on 14v, but the extra 20-40 watt worked miracles on these comps I think.

You running Pro's?? If so, 100w wasn't nearly enough for them. Send them 200w and they just barely start to come alive. Send them 300w+, and you are in bliss //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif