The RETURN

[DUMPED 10+ year member]

Well I have a few more updates for everyone..

first one being the sourcing out of the tow vehicle and trailer for the Van for transportation purposes to long distance shows (more than 500miles)

here are some pics

 

[DUMPED 10+ year member]

Next on the list was something that even I wasnt aware of.

As far as I was concerned we were going to work on the dash and doors over the next few days.. but instead other ideas were in the works..

Here is the van and what it looked like before

Now here is another van that happened to find it way into the shop.

Can you guess what happened next ? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[DUMPED 10+ year member]

 

[DUMPED 10+ year member]

As you can see we couldnt leave well enough alone.

After all the bodywork and paint it was decided that a front end conversion was needed. So with that being said the front end as you saw was chopped off our van and vice versa on the donner van as well and we opted to do the front end conversion. The new front end will be grafted on and will be painted to match the vehicle as well.

thanks for reading

 

[DUMPED 10+ year member]

for this update we decided to focus on the doors.

as it stood we had cut out the stencil for each door respectively thus far.

We knew that when it was all said and done certain components would need to be relocated in order to allow for each door to be completed. One of those things was the door handle.

Below are some pics which will show the work we did in order to relocate the handle and have it be fully functional at the same time.

 

[DUMPED 10+ year member]

 

[DUMPED 10+ year member]

 

[duece212 5,000+ posts]

you guys are crazy man, lots o work goin into this one

 

[DUMPED 10+ year member]

 

[DUMPED 10+ year member]

 

[DUMPED 10+ year member]

thats all for now folks

 

[murilo 10+ year member]

very nice!

 

[MmatsDude 10+ year member]

that going to be a crap load of mids n tweets .. dammnn!

 

[Farmacist 10+ year member]

too bad you guys didnt do the front end swap before the paint shop ..looks alot better though

 

[WOT]

Soooo, fiberglass is gonna be done inside the car for the dash? That would be crazy

Any sneak peeks on what the substage is gonna be