The Old Mofo 15's

[predxen 10+ year member]

I am looking for an Old mofo 15, the ones that weight like 40+ pounds and have a thicker suspension, they have to be around somewhere, but i cant find them. the ones on ebay are all the new style. Any help would be greatly appreciated.

Click to read more...

 

[audiobaun 5,000+ posts]

I havent seen one in approx 2yrs myself..I hope you locate one,,Good luck to you

 

[predxen 10+ year member]

have you seen the new ones ? how do they compare?

 

[audiobaun 5,000+ posts]

Ive seen, but havent heard them,do not know how they compare.Last Mojo I saw and had the pleasure to power up and listen too was approx 2yrs ago,an older friend brought a 12, and a 15, and we played with several old school Zed Made Autoteks and Hifonics, for 2 solid days.loved it!

 

[audiobaun 5,000+ posts]

We even played with some Old school RE subs too that were just as hudge and awesome bangers themselves

 

[fannin88 10+ year member]

Ive seen, but havent heard them,do not know how they compare.Last Mojo I saw and had the pleasure to power up and listen too was approx 2yrs ago,an older friend brought a 12, and a 15, and we played with several old school Zed Made Autoteks and Hifonics, for 2 solid days.loved it!

He's hunting a moFo, not a moJo

 

[hispls 5,000+ posts]

Saw a pair of 15's this weekend doing a 160 and change. Doubt he'll be selling them.

 

[predxen 10+ year member]

I found one on craigslist for 150, i want to pick it up, but its about 110 miles away. And i am also scared about being able to find a re-cone. If re-cones are fairly cheap, then i may run down there. It does not need a re-cone, but its better to be safe than sorry. Any advice ?

 

[THATpurpleKUSH 5,000+ posts]

some guy over by me had one for sale on craigslist (cleveland) that was prob the one that was 110 mi from you

splaudio or psi could prob recone for you

 

[SPLaudio 5,000+ posts]

i have reconed and the motors arent very good at all. you have to run a short ww coil due to the depth clearence. the backplate is NOT undercut so the coil dosent have alot of rearward travel.

they are a 3" coiled bigger motor vrs the newer 2.5" motor. if ur looking for something big and cheaper get a aq motor it will be alot louder.

i have been offered free mofo motors and they arent worth paying for the shipping...

 

[predxen 10+ year member]

i have reconed and the motors arent very good at all. you have to run a short ww coil due to the depth clearence. the backplate is NOT undercut so the coil dosent have alot of rearward travel.
they are a 3" coiled bigger motor vrs the newer 2.5" motor. if ur looking for something big and cheaper get a aq motor it will be alot louder.

i have been offered free mofo motors and they arent worth paying for the shipping...

The motor on my mofo is a 4" BASV / Kapton Hybrid 18 AWG, i just picked it up today, the thing weighs dam near 70 lbs.

 

[SPLaudio 5,000+ posts]

huh i have reconed before with 3" coils

 

[teamquakecelica 10+ year member]

The motor on my mofo is a 4" BASV / Kapton Hybrid 18 AWG, i just picked it up today, the thing weighs dam near 70 lbs.

HUH?... ummm.. a power acoustic MOFO weighs no where near 70lbs... and def. not a 4" coil.....

are you sure you didn't buy bath salts instead?... would explain a lot...

 

[wickedwitt 10+ year member]

This is a 70+lb monster, a MOFO is not.

 

[predxen 10+ year member]

well, the forum wont let me post a link until a moderator approves it, but here are the sub specs:

2600 watts power handling

340 oz. magnet

4" BASV / Kapton Hybrid 18 AWG Voice Coil

SPL 92 dB

Tuning: 40 Hz

Port size: 4" x 10"

Number of ports: 2

Non-pressed paper cone with aluminum rib insert (patent pending)

Dual 1ohm voice coil( Mine is a dual 2 ohm)

Die cast aluminum

Black wrinkle finish with Diamond cut

Wrinkle finish front & back plate

Large foam rubber surround

1-piece EVA gasket

Dual Conex spider

Woven tinsel lead through spider

Chrome screw terminals

Weight: 67 lbs

I can attest to the weight as i had to put it into the trunk. By the way, this is not the new winky dinky pos MOFO's that are on ebay. its more than four times what those are. The last time they made them is like in 2006? dont quote me but i think that is when they were last made.

 

[fadedd420_]

HUH?... ummm.. a power acoustic MOFO weighs no where near 70lbs... and def. not a 4" coil.....

are you sure you didn't buy bath salts instead?... would explain a lot...

Old post I know but I got a 4" coil mofo I'm trying get goils for... And it is 70+ pounds

 

[fadedd420_]

I am looking for an Old mofo 15, the ones that weight like 40+ pounds and have a thicker suspension, they have to be around somewhere, but i cant find them. the ones on ebay are all the new style. Any help would be greatly appreciated.

Old post but I got a 4" coil mofo. Had it for 9 years. Was blown before I got it. I fixed leads n I'm trying recone it now.. but it weighs 70+ pounds. A beast