carlosg_313 10+ year member
CarAudio.com Elite
- Thread Starter
- #16
****, i been slacking.
im waiting for the table saw to come so i can knock out the boxes quick instead of all day, and dont have time during the weekends. my plan was to make a box starting at 3.5cuft wit a 8-10in aero port, probably 30inches long for shits and giggles, have it start at 34hz, and as i push in the port more inside the box, i will be able to tune the frequency higher and decrease the internal size of the box....hope this plan works. LOL.
my goal for this test is to see how it does on a daily application, and then to a SPL application(tuning it at 40hz behind the B-pillar, none wall like if i was competing in usaci streetbeat)
im waiting for the table saw to come so i can knock out the boxes quick instead of all day, and dont have time during the weekends. my plan was to make a box starting at 3.5cuft wit a 8-10in aero port, probably 30inches long for shits and giggles, have it start at 34hz, and as i push in the port more inside the box, i will be able to tune the frequency higher and decrease the internal size of the box....hope this plan works. LOL.
my goal for this test is to see how it does on a daily application, and then to a SPL application(tuning it at 40hz behind the B-pillar, none wall like if i was competing in usaci streetbeat)