TCAB boxes

[audiofreak94 10+ year member]

Learnng is everywhere... except in 90% of the ca.com threads, most make you dumber, and dumber... and dumber... until you finally get banned.

are you trying to hint at something? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[ramos 5,000+ posts]

Learnng is everywhere... except in 90% of the ca.com threads, most make you dumber, and dumber... and dumber... until you finally get banned.

Yep, you can't polish a turd //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Spkrman]

are you trying to hint at something? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

hehehehehehe

//content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif :naughty: //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif :naughty:

 

[hzsogood 5,000+ posts]

yessir, I've tried every readily available wood glue, and its what I prefer to use.

Usually what i use as well. What did u think of the elmers probond, to me that was good too

 

[Mr. Opportunist 10+ year member]

josh is a dum bass //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif
(pwnt)

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif *** hole //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Spkrman]

Usually what i use as well. What did u think of the elmers probond, to me that was good too

I'd prefer it if it was thicker... its too runny for vertical panels - feels almost watered down.

All the above glues would still hold plenty strong as long as there is also a mechanical fastener in there... the wood glues don't "require" them... but a box held together solely with liquid nails is probably going to fail... at that pont you might as well use chewing gum.

 

[ramos 5,000+ posts]

I'd prefer it if it was thicker... its too runny for vertical panels - feels almost watered down.

I wonder if elmers is having batching problems with it. Reason I say that, is the bottle I bought is so d@mn thick it's like cold syrup. I can turn the bottle upside down and smoke a cigarette before the chit comes out. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Johnny Drama 5,000+ posts]

I still want to do the enclosure testing that was talked about a month ago...

THAT would be awsome if it could happen.

 

[Mr. Opportunist 10+ year member]

I'd prefer it if it was thicker... its too runny for vertical panels - feels almost watered down.
All the above glues would still hold plenty strong as long as there is also a mechanical fastener in there... the wood glues don't "require" them... but a box held together solely with liquid nails is probably going to fail... at that pont you might as well use chewing gum.

alothough it is good for filling gaps //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[skeptikal Premium Member]

wow man only 140 + shipping?

I dont care what anyone says it is a deal on a good performing box. A 'custom' audio shop (owned by Chuck Norris) around here quoted me $250 for a box that will do 140db on the TL for a single 15. and thats just MDF wood + wood glue and screws lol.

I still dont understand why people b*tcha bout the price. If you dont wanna pay it, don't there are plenty of people waiting in line to buy these boxes, and the fact of the matter is they perform.

 

[Spkrman]

I work at a place that has a pretty good supplier with good bulk pricing. If you want, you can pm what your paying for the poly and quantity. And I'll see if my suppliers any cheaper for you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I'm all for it

Now I just buy 3-4 at a time... as 1 tube normally is enough for 3-4 boxes... cost is $3.50, if I remember correctly.

If the price can get under $2.50 I'd be all for buyng a bulk pack... any more than that and the up front investment isn't justified... not at the current pace.

PM me either way //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hzsogood 5,000+ posts]

wow man only 140 + shipping?
I dont care what anyone says it is a deal on a good performing box. A 'custom' audio shop (owned by Chuck Norris) around here quoted me $250 for a box that will do 140db on the TL for a single 15. and thats just MDF wood + wood glue and screws lol.

I still dont understand why people b*tcha bout the price. If you dont wanna pay it, don't there are plenty of people waiting in line to buy these boxes, and the fact of the matter is they perform.

140 for what , cn box?

 

[ramos 5,000+ posts]

I'm all for it
Now I just buy 3-4 at a time... as 1 tube normally is enough for 3-4 boxes... cost is $3.50, if I remember correctly.

If the price can get under $2.50 I'd be all for buyng a bulk pack... any more than that and the up front investment isn't justified... not at the current pace.

PM me either way //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I'll check with him tomorrow. he's gonna be in to show us some new stuff //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Spkrman]

I wonder if elmers is having batching problems with it. Reason I say that, is the bottle I bought is so d@mn thick it's like cold syrup. I can turn the bottle upside down and smoke a cigarette before the chit comes out. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Always been runny for me, it only gets thick like that when its cold, below 40-50 degrees.

It wouldnt surprise me if it was inconsistent across the board, though.

 

[skeptikal Premium Member]

140 for what , cn box?

lol hell no he's the one that wanted $250... i kinda chuckled and said "hell no"

140 for the TCAB box.