1. Product: 15" TC Sounds LMS-4000
2. Specs: TC Sounds (LMS-4000)
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition: 7.5/10 condition 10/10 mechanical
Cone has a few dings in it but the pics make it look worse than it really is,the motor has a little oxidation but again the pics make it look worse. You can probably clean it up tho. Also there is a small rip in the surround,I dont know how it got there or how long its been there but it doesnt seem to effect it. Im sure you could fix that too.
For a SQ sub this thing gets pretty loud and sounds amazing. Only seen around 700wrms from a JBL BPx500.1. Ive had this sub for a couple years I got it from member tc3k101 in a trade. I have refs here,Ive been here for over 3 years and on ecoustics for over 6.
4. Price: :Lets start at $250 + s/h,PP fees
5. Pictures:
2. Specs: TC Sounds (LMS-4000)
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition: 7.5/10 condition 10/10 mechanical
Cone has a few dings in it but the pics make it look worse than it really is,the motor has a little oxidation but again the pics make it look worse. You can probably clean it up tho. Also there is a small rip in the surround,I dont know how it got there or how long its been there but it doesnt seem to effect it. Im sure you could fix that too.
For a SQ sub this thing gets pretty loud and sounds amazing. Only seen around 700wrms from a JBL BPx500.1. Ive had this sub for a couple years I got it from member tc3k101 in a trade. I have refs here,Ive been here for over 3 years and on ecoustics for over 6.
4. Price: :Lets start at $250 + s/h,PP fees
5. Pictures:
