TC Sounds 3HP's

[Parker G 10+ year member]

I'm trying to find out some info on these motors. I need to know the top plate height and ID and the Pole's OD. Thanks to everyone that has an intelligent and correct answer.

Click to read more...

 

[Parker G 10+ year member]

bump for info needed

 

[rollerdj 10+ year member]

I know mine has a .5" top plate. If no one has posted the rest by the time I get home I'll mic the other two sizes.

 

[NDMstang65 10+ year member]

Standard 3" coil will work fine with it..you don't need the pole OD if you are getting parts from somebody that uses 3.000" coils.

Top plate height is the biggy..as well as top plate ID.

But most 3hp gaps will accommodate nearly any coil we have..minus the BTL coils, the OD is far too large.

Hope this helps.

Thanks!

Nick

 

[Parker G 10+ year member]

I know mine has a .5" top plate. If no one has posted the rest by the time I get home I'll mic the other two sizes.

Thanks

Standard 3" coil will work fine with it..you don't need the pole OD if you are getting parts from somebody that uses 3.000" coils.
Top plate height is the biggy..as well as top plate ID.

But most 3hp gaps will accommodate nearly any coil we have..minus the BTL coils, the OD is far too large.

Hope this helps.

Thanks!

Nick

Thanks Nick

 

[Haunz 10+ year member]

The top plates are 37mm thick and the OD of the pole is 2.97" as measured from my 3HP neo's; and IIRC they were the same dimensions with the regular 3hp steel parts I got from woofercooker...

I'm going to get some oversized coils wound with a ~ 90mm wrap.. if you're interested PM me..

 

[Parker G 10+ year member]

Parker, you are such a pathetic faggot. why dont you try designing your own shit instead of ripping of other stuff for your "brand"?

Wow, Your cool........ I just bought some LA X2 12's from spy and want to recone them into some 18's you douche bag! And I have a brand??? Since when? Someone forgot to tell me:crazy:

http://www.caraudio.com/forum/showthread.php?t=393301&highlight=LA