I have a few broken 8"s that need to be fixed, I could pull the baskets off and ship the motors alone priority mail flat rate box for $9 each... they all need recones anyway
the 8A I bought blown to attempt to take of the cone and recycle it, that didn't fly //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif but it also needs a new basket now, I'm pretty sure TC could built it as a 10" or 8" if they were asked to.
the 2+ 8"s are not normal sized you can see from the pix, if anyone wants I'll pull the rubber boot, but it only drops the size like 1/4" per side if that... motor's were supposed to be for 10" or 12"s as they custom drilled the baskets to fit, one is comming off the basket a little, it's the one that still has the cone, so that one reads d2s 4.6 series'ed at least, and plays but makes mechanical noises the other I took the cone apart since the surround was torn around the sub and I put in the 9kv2 cone to make this vid
http://realmofexcursion.com/videos/TC%20Sounds/tc2+8.1a.wmv
9kv2 had an open coil so I took it apart to use the cone to make the 2+ 8" work enough to do the wall socket vid //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
anyhow, I can take more pix if anyone needs them, since they all need recones I can pull the baskets and put them over the motors and see if it can fit both pieces in a flat rate box //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
asking $50 shipped per 2+ motor and $40 shipped for the 8a motor (smaller one in the pix) and $30 shipped for the 9kv2 motor. the 8a basket is cracked off and worthless so I won't really think you'll need it if anyone wants any of this stuff lmk...
//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif thanks for looking, oh yeah, I'll entertain offers //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif and trades just figured I'd give a general price range for them
the 8A I bought blown to attempt to take of the cone and recycle it, that didn't fly //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif but it also needs a new basket now, I'm pretty sure TC could built it as a 10" or 8" if they were asked to.
the 2+ 8"s are not normal sized you can see from the pix, if anyone wants I'll pull the rubber boot, but it only drops the size like 1/4" per side if that... motor's were supposed to be for 10" or 12"s as they custom drilled the baskets to fit, one is comming off the basket a little, it's the one that still has the cone, so that one reads d2s 4.6 series'ed at least, and plays but makes mechanical noises the other I took the cone apart since the surround was torn around the sub and I put in the 9kv2 cone to make this vid
http://realmofexcursion.com/videos/TC%20Sounds/tc2+8.1a.wmv
9kv2 had an open coil so I took it apart to use the cone to make the 2+ 8" work enough to do the wall socket vid //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
anyhow, I can take more pix if anyone needs them, since they all need recones I can pull the baskets and put them over the motors and see if it can fit both pieces in a flat rate box //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
asking $50 shipped per 2+ motor and $40 shipped for the 8a motor (smaller one in the pix) and $30 shipped for the 9kv2 motor. the 8a basket is cracked off and worthless so I won't really think you'll need it if anyone wants any of this stuff lmk...
//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif thanks for looking, oh yeah, I'll entertain offers //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif and trades just figured I'd give a general price range for them
