Sold TC sounds 2+ 8"s, eD 8A, eD 9kv2 need recones/fixing

[HawaiianBassHed 10+ year member]

I have a few broken 8"s that need to be fixed, I could pull the baskets off and ship the motors alone priority mail flat rate box for $9 each... they all need recones anyway

the 8A I bought blown to attempt to take of the cone and recycle it, that didn't fly //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif but it also needs a new basket now, I'm pretty sure TC could built it as a 10" or 8" if they were asked to.

the 2+ 8"s are not normal sized you can see from the pix, if anyone wants I'll pull the rubber boot, but it only drops the size like 1/4" per side if that... motor's were supposed to be for 10" or 12"s as they custom drilled the baskets to fit, one is comming off the basket a little, it's the one that still has the cone, so that one reads d2s 4.6 series'ed at least, and plays but makes mechanical noises the other I took the cone apart since the surround was torn around the sub and I put in the 9kv2 cone to make this vid

http://realmofexcursion.com/videos/TC%20Sounds/tc2+8.1a.wmv

9kv2 had an open coil so I took it apart to use the cone to make the 2+ 8" work enough to do the wall socket vid //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

anyhow, I can take more pix if anyone needs them, since they all need recones I can pull the baskets and put them over the motors and see if it can fit both pieces in a flat rate box //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

asking $50 shipped per 2+ motor and $40 shipped for the 8a motor (smaller one in the pix) and $30 shipped for the 9kv2 motor. the 8a basket is cracked off and worthless so I won't really think you'll need it if anyone wants any of this stuff lmk...

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif thanks for looking, oh yeah, I'll entertain offers //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif and trades just figured I'd give a general price range for them

Click to read more...

 

[Zeuslicious 5,000+ posts]

Bump for a good guy.

 

[nate2587 10+ year member]

so lemme get this straight 50 shipped fo both motors?

 

[HawaiianBassHed 10+ year member]

each... obo //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif I wouldn't want to do $50 shipped for the pair, I'd be getting $30 for the pair... Tim Roy could probably recone them for pretty cheap... and being a good sub for the price and size that way //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[nate2587 10+ year member]

each... obo //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif I wouldn't want to do $50 shipped for the pair, I'd be getting $30 for the pair... Tim Roy could probably recone them for pretty cheap... and being a good sub for the price and size that way //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

i would recone myself. um poo u got me in a bind

 

[HawaiianBassHed 10+ year member]

wow... you recone subs... sh!t pay for shipping on the 8a and you can have it too, I'd rather have someone who knows what they'd doing put them to use, I don't even care if you recone them and sell them... I have an Atomic AP motor I got from a 1st gen AP if you want that too //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif forgot about it til now, can take pix tomorrow, it wasn't fat surround like the newer stuff...

 

[nate2587 10+ year member]

wow... you recone subs... sh!t pay for shipping on the 8a and you can have it too, I'd rather have someone who knows what they'd doing put them to use, I don't even care if you recone them and sell them... I have an Atomic AP motor I got from a 1st gen AP if you want that too //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif forgot about it til now, can take pix tomorrow, it wasn't fat surround like the newer stuff...

ygpm

 

[nate2587 10+ year member]

i think i might take all of them except the smallest one i have no use for pathetic subs //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

u got any other ones for sale? just as long as the motor is intact i can use it

 

[HawaiianBassHed 10+ year member]

open to trades for anything I could possibly put to use... dive fins, a new dive light //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif a new used speargun just for the hell of it //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[HawaiianBassHed 10+ year member]

I've been getting alot of PM's on the TC 8"s, they NEED RECONES I don't know if people don't read or what, but they're DUAL 2s and I don't really know what else to tell about them... they're soild loud little subs, the only thing out I could compare them to is Rl-i 8"s, these were made with low bass and output in mind from ported boxes, I had them made back when Stephen worked there, I wanted to start my own company back then, but things change and it's a tough market that I don't really care to be involved in... so I'm selling them... if they don't sell I'll have them reconed myself and keep them to play with.

 

[aesoj 10+ year member]

sent you a pm.

-Jose

 

[HawaiianBassHed 10+ year member]

a little size comparison, notice the TC's are noticably wider even in a crappy pic

the sub next to it is a DD 1008a

 

[HawaiianBassHed 10+ year member]

$45 shipped per large 8" motor/basket

$35 shipped for the eD 8a

$25 shipped on the blown 9kv2

all will be shipped priority flat rate in two pieces, I will seperate the basket and motor so it'll fit, and I'll pack it well... the motor on the TC 8"s are the 2+ so feel free to call TC and see what a recone would cost, I'd imagine $70ish shipped back to you...

I also have a Phoenix Gold AX-204 2 way xover I have a little bag of chips for it I'd say probably at least 10 chips, I'll look if anyone is intrested, off hand in the bag I saw from 80hz to like 720hz iirc there was close to like 20 chips when I got them, but broke a few, lost a couple... $45 shipped priority mail. I have the original box, it was mint when I got it, but I had it in my truck toolbox after I uninstalled it from my truck so it got a little beat up by my tools rolling over it //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

also the one screw is missing, wife said she saw it and vacuumed it up, may be able to get it, maybe not //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I'll ask her to look for it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif thanks for looking //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[HawaiianBassHed 10+ year member]

come on, I know somebody wants to have some sick 8"s I just want amps since I currently don't have any. OR if anyone here fixes amps I have a couple that're stuck in protect, and a couple that partially work that I'd like fixed I'd trade these for //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[stupify 10+ year member]

both tc 2+ motors sold to me just sent payment