tc-1000 8"

[andar 10+ year member]

anyone with a tc-1k 8" feed it more than the RMS?

i think im going to be getting one soon, and I have a possible 600w to feed it.

Click to read more...

 

[Justintoxicated 10+ year member]

According to TC's website it might be fine.

 

[andar 10+ year member]

yeah there website says "don't be afraid to feed it 1000 clean watts"

but i'd rather hear someones experiences

 

[andar 10+ year member]

anyone else?

 

[leonsv 10+ year member]

slowly turn up the volume and pay attention for any clipping sounds and or weird smells?... good place to start

 

[PatFitz9 10+ year member]

power handling will change with your box design...

 

[mannyb18b]

turn it up till it starts to hit the back plate.

 

[Justintoxicated 10+ year member]

I'm powering my 2 10's with a D5 1200.1 and they take it pretty well, but I don't know how much power they are actualy getting. They are in a .65 cuft sealed box though...

 

[sqhertz 5,000+ posts]

i got around 400 going to mine and im sure i could give it more...

 

[andar 10+ year member]

thanks for all the input..

any recommendations for box?

i was thinking around 1 cuft @ 32hz

 

[dalucifer 10+ year member]

thanks for all the input..
any recommendations for box?

i was thinking around 1 cuft @ 32hz

That could work, but it prob a we bit to big. You can throw 1200 rms(can take it but not recommended) at the sub, but it doesnt need it at all. One would not need to see it more than 400 rms to get it to its full potential.

 

[sqhertz 5,000+ posts]

That could work, but it prob a we bit to big. You can throw 1200 rms(can take it but not recommended) at the sub, but it doesnt need it at all. One would not need to see it more than 400 rms to get it to its full potential.

teh truth.

i have mine in the .8@36 they reccomend, but slot ported, and its very impressive. owns the assassin 8 i had in its spec box in everyway.

 

[andar 10+ year member]

did you use a plan for your box?

 

[sqhertz 5,000+ posts]

did you use a plan for your box?

had a member on this forum make a design/cutsheet for me. made to the dimensions i needed and slot ported. worth my $10.

 

[andar 10+ year member]

do you remember who did it/do you still have the design?

what do you mean just slot ported? just rectangular?