T20001bd on an L7

[talon2nr7588 10+ year member]

you guys think a RF T20001bd be to much a 15" L7? i know the l7s can handle a shi+ load of power but i have the birthsheet of these amps and then bench around 2800. i'm talking about with all the gains at 0

Click to read more...

 

[Flipx99 5,000+ posts]

you guys think a RF T20001bd be to much a 15" L7? i know the l7s can handle a shi+ load of power but i have the birthsheet of these amps and then bench around 2800. i'm talking about with all the gains at 0

On my amp, if you put the gain on 0 you will have serious clipping. Turning them to 6 is nearly off. But I think that is what you mean.

I think that amp would be good as you got plenty of headroom so you won't have to push your amp hard.

Good Luck

 

[seg_representin 10+ year member]

Get 2 L7's

 

[talon2nr7588 10+ year member]

i do but they're 2 ohm DVC

 

[vetkilr 10+ year member]

Its good to have headroom on a amp.........but I think in the right box it will handle it just fine.

 

[seg_representin 10+ year member]

There was a guy sellin 2 dual 4 ohm models for 350 on the for sale foruml. But you could just get another dual 2 and wire it down to a 2 ohm load.

 

[talon2nr7588 10+ year member]

i have 2 but it is a waste of money if i run it at 2 ohms

 

[seg_representin 10+ year member]

Yea i can see what your saying. Just watch your gain and get the right box.

 

[vetkilr 10+ year member]

i have 2 but it is a waste of money if i run it at 2 ohms

why

 

[talon2nr7588 10+ year member]

cause it makes most of its power at 1 ohm. and it's not .5 stable

 

[vetkilr 10+ year member]

cause it makes most of its power at 1 ohm. and it's not .5 stable

But if you hook it up for .5 at the subs your not really gettin .5 after the rise so the amp should be fine........youll be over 1 ohm easy.So whats the problem really.

I think that Rockford is made good enough that it will take it.If not get a Kicker

They make thier power at 2 ohms

 

[ultimate157 5,000+ posts]

I think that Rockford is made good enough that it will take it.

Yea, I have a 200w x 1 @ 4 ohm (bridge) RF amp and I was running it at 2 ohms daily with gains at little over half. Took it just fine and sounded good doing it.

 

[Towncar 10+ year member]

Like mentioned above headroom. Set gains for 1500-2kw, and be done. They can handle every bit of it.

 

[talon2nr7588 10+ year member]

But if you hook it up for .5 at the subs your not really gettin .5 after the rise so the amp should be fine........youll be over 1 ohm easy.So whats the problem really.
I think that Rockford is made good enough that it will take it.If not get a Kicker

They make thier power at 2 ohms

good point i never thought about impediance rise. i also was thinking about getting a kicker. i 'll just have to wait and see.

 

[vetkilr 10+ year member]

good point i never thought about impediance rise. i also was thinking about getting a kicker. i 'll just have to wait and see.

525 plus paypal fees today only