Sundown SAX.100.4

  • 3
    Participant count
  • Participant list

ellocojorge
10+ year member

Senior VIP Member
251
0
dallas,tx
1. Product: sundown sax100.4d

2. Specs:

4/3/2 Channel Bridgeable Class-AB Amplifier

MOSFET PWM Power Supply

Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load

Variable Subsonic Filter

Independent 1/2 and 3/4 Channel High Pass Filter Variable

with x 10 Range Selectable Switch

Independent 1/2 and 3/4 Channel Low Pass Filter Variable

with x 10 Range Selectable Switch

HPF/FULL/LPF Selectable Switch

Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable

Switch with 12dB and 24dB Octave

Variable Input Level Control

Input Sensitivity : 200mV ~ 6V

Subsonic Filter : 10Hz ~ 500Hz

Signal Input and Line Out RCA Connectors

Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)

Tested Voltage & THD: 14.4V & Less than 0.05% THD

Operating Voltage : DC10V~16V Power Input

Wired Remote Controller

3. Description/Condition:

cosmetic 8\10(acouple a scratches) mechanical ( 8/10) has a turn off pop. im not sure if it is the amp or my car but i am letting the buyer be aware of this, when i turn off the ignition there is occasionally a pop noise from one of the speakers. this doesnt occur if i turn the amp amp off from the HU so im baffle)

4. Price: :

280shipped obo will ship in original packing. this is the v.1 version with the revised heatsink and crossovers. will also come with the bass knob if i can find it. price is obo, only trades i would take is a phoenix gold xenon mono or 4channel

5. Pictures:

050511162928.jpg


050511162941.jpg


050511162949.jpg



 
i sent you a PM here on caco dood. about a 125.2...i know you are not really looking for that butt.t.t.t....t.t.t........ttttttt..... //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You stated you have an SIA 3500 right now. I would run it for now with the supply for the demand, until you decide you want more power and have...
3
642
Wired to option #1 would be ideal for those subs. I have quite a few 10s. in the proper enclosure, tens can get down pretty good with the right...
10
1K
My wife is gonna sh!t bricks when my subs get here. She doesn't know yet
19
3K

About this thread

ellocojorge

10+ year member
Senior VIP Member
Thread starter
ellocojorge
Joined
Location
dallas,tx
Start date
Participants
Who Replied
Replies
4
Views
1,571
Last reply date
Last reply from
NegreteJ
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top