suggest amp kit

[pbnj22 10+ year member]

can suggest someone me a good 4 channel amp kit for around 100 to 200 watts rms each speaker? or point me in the right direction of how much I should be spending? or what to look for?

any links to a kit on a website would be helpful.... or would it be cheaper piecing one together from here?

Click to read more...

 

[mylows10 5,000+ posts]

are you looking for the wires or amp and wires ????//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[pbnj22 10+ year member]

well both eventually but just wires for the purpose of this post

 

[dirtyunclerandy 10+ year member]

knukonceptz

 

[mylows10 5,000+ posts]

budget?

 

[pbnj22 10+ year member]

where would be my bang for the buck? I am seeng some decent ones around 100 bucks but I was wondering if i could get away with spending less or not. Or shoudl i look to buying used on here or should i even try to just piece together a kit or would I end up paying to much for shipping that way?

 

[mylows10 5,000+ posts]

what kind of power are you going to be running ,that will determine your amp kit size

 

[pbnj22 10+ year member]

somewhere between 100 to 200 watts rms each speaker, I dont have any speakers or amp picked out yet..

 

[mylows10 5,000+ posts]

But you want a kit for 2 amps so it needs to be big enough to support the sub amp too that's why I ask. Need total watts your looking at

 

[pbnj22 10+ year member]

I already have a sub and amp hooked up... Im running 1000 watts rms in the back with one run of 0 guage. now I am getting an amp and some speakers... So I just need a channel amp kit to run around 200 watts rms to 4 speakers.

 

[Ionakron 10+ year member]

run a distro block off that 0 gauge. Go with a knukonceptz.com 8 gauge or 4 gauge kit for the amp.

 

[mylows10 5,000+ posts]

You need a district block and 2 sets of rcas and a few small pieces of 0 and 4 gauge wire I have everything you need to do this 70 shipped for everything you'll need to add a 4 channel amp

 

[pbnj22 10+ year member]

why would i need more 0 gauge? and 70 shipped for distro block (0 in and 0, 4 out?) some 4 gauge for power from the distro to amp, 4 gauge for ground and then 2 sets of 2 channel rcas, and a remote lead?

 

[mylows10 5,000+ posts]

So you can still run 0 gauge into the sub amp but not necessary you can use 4 gauge too. But the distro block and 2 sets of rcas alone cost $50 new which these are then shipping the remote wire and some 4 gauge wire all ofc wire