Subs stopped working

Bobby322
10+ year member

CarAudio.com Veteran
I was driving and my subs were playing fine. I had them up pretty loud then they just stopped working. the amp isn't in protect, I didn't smell anything, I pulled out the subs and the wires were still attached, the amp fuses are fine. The amp still turns on...

I disconnected the sub wires at the amp and reconected them. I got out the continuity tester and tested out all the connections from the amp to the terminals, to the terminals to the subs and its all getting a connection. And when I touched the tester to the sub coils they made a "popping/scrathing" noise and moved a little bit. The amp has the green light on for power and not the protect mode light. Is it possible the amp got stuck in protect mode or something? or is it my subs?

Its a Hifonics 1606D amp and im running 2 of these subs - http://dls.se/en/car/prod.html?produkt=en_138

Any help is appreciated.

 
As in the came loose or something? Wouldn't the only thing that could come loose and affect my subs be the RCA's? Doubt anything came loose on HU

 
I know I've been having alot of problems lately...fuse, box, now this.

I dont thing the ground and power cables touched on my amp.

The amp still powers on..and my tester still reads that the subs are getting connections

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Bobby322

10+ year member
CarAudio.com Veteran
Thread starter
Bobby322
Joined
Location
TX
Start date
Participants
Who Replied
Replies
11
Views
862
Last reply date
Last reply from
mazdakid
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top