Subs don't fit!!! Suggestions on 10"s with less than 6.5" mounting depth.

[oxsign 5,000+ posts]

Ok so I have an '05 chevy crewcab. I've cut & redrilled the brackets to move the rear seat forward 2". I now have 2.6 cubes net after sub/port disspacement. The problem I have now is that my 2 DD 2510 are to deep to fit. Is there another pair of 10"s that can take a sundown 3000D with less that 6.5" of mounting depth?!?!?! I'll get pix up of the box I have done so far later after work.

Click to read more...

 

[KHARPS 10+ year member]

Fi BL10...they are only 6.25'' deep and have no pole vent so you don't have to worry about it being too close to the back of the box.

 

[KHARPS 10+ year member]

I think my lv4xl10 is only 6.5'' deep too, maybe 6-5/8'' at the most. 1500w isn't enough for it imo though, I wish I had a saz3000d for just one //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[Skip01 5,000+ posts]

AQ SDC 10"

6.25 depth

Heck the 12 is 6.5"

 

[TNTR70 10+ year member]

try building a ring to mount the speaker to so the woofer sits out another 3/4 inch or cut the back of the box where the magnet is hitting to put a piece of 3/4 there if it will work or both if you got the room

 

[oxsign 5,000+ posts]

try building a ring to mount the speaker to so the woofer sits out another 3/4 inch or cut the back of the box where the magnet is hitting to put a piece of 3/4 there if it will work or both if you got the room

No room. The back of the box is up against the wall, and the front is to close to the back of the rear seat. I wish I still had my 4 1508. //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

And the truck it's going into.

 

[TeamPSI 10+ year member]

Incriminator has a King of Bass - Tommy Mckinnie edition sub thats designed just for that very thing...

 

[oxsign 5,000+ posts]

Incriminator has a King of Bass - Tommy Mckinnie edition sub thats designed just for that very thing...

I'm still doing a search for them, but so far all I can find is 12"s & 15"s.

 

[KHARPS 10+ year member]

Incriminator has a King of Bass - Tommy Mckinnie edition sub thats designed just for that very thing...

I'd like more info on this too.

 

[iamamp3pimp 5,000+ posts]

give nick a call and see whats up.

best way to get info is to go to the source...!

 

[KHARPS 10+ year member]

Did you put that vertical piece in there to prevent the top from sagging because you haven't cut the front baffle yet? If so, that's a good idea....I wish I would have done that on one of my builds. I put every other piece together and didn't do the baffle until the next day...by the time I got around to putting the baffle on, the top had sagged enough to pretty much ruin the box //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[oxsign 5,000+ posts]

LOL ya, that's exactly why I did it. In that pic I hadn't yet put the sides on it. So it was there just to keep it squared up.