subs blown?

are they bridged properly?

im assuming single 4 ohms, meaning you are either showing your amp an 8 ohm or 4 ohm load, if its accidentaly wired in series, youa re getting like no power at ll..

also, it sounds like it could be a phase problem...

ie, wired in reverse...

 
well I can take a look at them one more time, I just dont know what else to do. I have everything hooked up correct, there is just no bass to them, it sounds like sh*t. I have tried wiring them up different too, what else could I do? What does a blown sub sound like?

 
usually?

nothing...

what happens is the V C blows, so it locks up and wont move...

im serious, check your volt-oh meter on each VC independantly...

then, if thats not the problem, make sure your subs are wired in teh same phase.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

91Sunbird

10+ year member
Member
Thread starter
91Sunbird
Joined
Location
St. Joseph,MO
Start date
Participants
Who Replied
Replies
13
Views
525
Last reply date
Last reply from
Wonderbread
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top