Stripped/rusted screw

[kickerlivinloud 10+ year member]

when in doubt get the torch. Last job i had was rebuilding old compressors the torch is the best. If it has not moved since 1935 the torch gets it moving

Agreed. I have yet to find a nut/bolt that a torch couldn't loosen. If you don't have access to a torch I suggest lots of WD40 or if that fails get out the old trusty saw zaw!

Jon

 

[Racerx250 10+ year member]

drill it out. Or as gotparts90 says use a torch.

I had an o2 sensor stuck in my firebird, the one behind the cat and that btch would not come off for the life of me. So my dad got out the torch, hammer and wrench. Btch come off after about 20 motherfkrs and a couple sonsofbtchs.

 

[TNTR70 10+ year member]

put old spring back in on drivers side....sell new set of springs on classifieds

 

[undeadxsunshine 10+ year member]

screw extractors work great

 

[MemphisCherokee 10+ year member]

just torch the bastard off

simple as that

dont draw it out, use the simple solution

 

[Proximity 10+ year member]

Was able to get the other bolt off the other end of the end link off. Tried the screw extractors and drilled the **** out of it and got nothing.

 

[steveBeatz]

Get a chizzel and chizzel it off and just get a new bolt.

 

[mbaoo]

 

[82 cutlass 10+ year member]

Cut it off and get a new link