Steering wheel controls

  • 2
    Participant count
  • Participant list

Bpriceio

CarAudio.com Newbie
My boat has a cabin that is water tight for the head unit, sub, and amps. I put a regular head unit in. I have the round marine remote on the console. I'd like to connect it to the Kenwood headunit I put in. Can I do this via the steering wheel control?
 
My boat has a cabin that is water tight for the head unit, sub, and amps. I put a regular head unit in. I have the round marine remote on the console. I'd like to connect it to the Kenwood headunit I put in. Can I do this via the steering wheel control?
Not enough information. Some remote units are radio specific while others are stand alone.
 
Activity
No one is currently typing a reply...

Similar threads

thanks for your time in replying and the effort you have obviously gone to, my radio only has just one single wire for the steering wheel control...
4
1K
Did the instructions on the back of the main module not work? They are vague but give you a general procedure.
1
1K
Update: I emailed Atoto support. They are asking me which wire in this Simple Soft CAN BUS controls the steering buttons? If I knew that, I...
1
1K
That might depend on the head unit. Some can use a 5 amp fuse, some a 10amp, some a 15amp fuse (if / depending on how much it's powering the...
5
1K
I'll give that try, setting the LPF on the head unit sub outputs to 80Hz and leaving the HPF at 120Hz. If I didn't set an HPF, what would the...
3
2K

About this thread

Bpriceio

CarAudio.com Newbie
Thread starter
Bpriceio
Joined
Location
Missouri
Start date
Participants
Who Replied
Replies
1
Views
866
Last reply date
Last reply from
1aespinoza
pattern-wavelength.jpg

winkychevelle

    Apr 27, 2024
  • 0
  • 0
20221010_113336 (5).jpg

audiobaun

    Apr 27, 2024
  • 0
  • 0

Latest topics

Top