SSA Evil6.5

[denim 5,000+ posts]

 

These have been a long time coming, and a good while until everything was set to get these ready to go. Due to not being a simple slap a logo on an off the shelf item and non-standard design, there were lots of part delays and design tweaks, but finally production is wrapping up. They will be on the way to us shortly.

 

Ok, so these are a 2" copper coil, shorting ring, solid pole, phase plug, underhung design. In final testing, they are a very very clean, warm sound. They were right at home in an IB rig that Neal Munro helped out on big time, so dropping into an average car door is excellent.

 

The Evil6.5's have push terminals that are good for 10 gauge wire. Nomex spiders, so they will able take the same long term abuse that the SSA subs are known for. Also, the glass fiber cones performed a little better than the poly cones in testing.

 

I will be setting these at 120-150rms, available in both 4 & 8ohm.

 

Specs are below, on the bottom right. Follow the green slope for the production model. I had put together a slightly different prototype model to see what combination of aspects were the best performing for our goals, so ignore the purple slope and specs on the left.

 

 

 

Pricing is not announced yet, but they will be well priced and ship same or next business day.

Click to read more...

 

[Popwarhomie 5,000+ posts]

Plans for 10"s?? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[denim 5,000+ posts]

Plans for 10"s?? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Right now, it is just a 6.5" mid. Depending on demand we may expand to different sizes.

 

[Popwarhomie 5,000+ posts]

Right now, it is just a 6.5" mid. Depending on demand we may expand to different sizes.

Gotcha. Thanks. They look sick!

 

[jRi0T68]

I definitely will be following this. In the phase of planning out my highs/mids currently.

 

[denim 5,000+ posts]

I definitely will be following this. In the phase of planning out my highs/mids currently.

I hope to have a release date shortly.

 

[denim 5,000+ posts]

Production unit photos at the factory.

View attachment 26554801

 

[Papermaker85 5,000+ posts]

looks amazing!

 

[The Camry]

I have been nothing but completely satisfied with my ICON. I definitely dont need these drivers but if this is going to be a limited time only thing. Ill be getting a pair.

Any type of FR data?

Sent from my SGH-T999 using Tapatalk

 

[DCbass]

Where will these be available for sale?

 

[disturbed471985 5,000+ posts]

I kinda like the chrome rim but at the same time it makes me think of audiobahn so IDK.....

 

[garychurch84 10+ year member]

Any type of FR data?

Sent from my SGH-T999 using Tapatalkfirst post!

 

[denim 5,000+ posts]

looks amazing!

Thank you. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[denim 5,000+ posts]

I have been nothing but completely satisfied with my ICON. I definitely dont need these drivers but if this is going to be a limited time only thing. Ill be getting a pair.
Any type of FR data?

Only data I have right now is posted above. We will be getting expanded specs fairly soon.

 

[denim 5,000+ posts]

Where will these be available for sale?

I will have that date shortly, currently getting shipping squared away.

 

---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------

 

I kinda like the chrome rim but at the same time it makes me think of audiobahn so IDK.....

Its not chrome, even though it looks it. It is just an unpainted portion of the basket frame.