son of a #*%^&!!!

[l_spade 10+ year member]

Such a simple error caused so much trouble and this is like the 5th time I did it. I took my gigantic 10 cubic feet enclosure (prolly weighs near 250lbs from all of the interior bracing) for my two 15's out of my blazer a week ago in order to carpet it. There is a car show in two days so I thought I would throw it back in for the weekend. I put the subs in and screwed them down and got the amp all hooked up. I put my fuze in and it sparked very big and i thought **** i blew my fricken $2 fuse" //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif but I checked the amp and it still had power but the subs weren't makin noise. It all of the sudden hit me that I forgot to connect the wires INSIDE OF THE BOX! //content.invisioncic.com/y282845/emoticons/beatdeadhorse5.gif.5d70132dea1eb89b73bf2fdbb6027dd6.gif I AM SO PISSED. My subs stick into the holes extremely tight and getting the subs out even after the screws are takin off is like a 15 minute task. THEN TOO TOP IT OFF MY DRILL DIED!!! So now i am waitin for the battery to charge so i can get this done and go to bed. Just thought you guys might get a kick out over my troubles.

Moral of the story: Don't forget to hook up yer dam subs.

Click to read more...

 

[jeeper07 5,000+ posts]

hahaha ive never heard of that

 

[Sleeklsc 5,000+ posts]

i have done stupid sh!t like that every once and a while...Never involving a 200lb+ box though...

gl

 

[supraman1379 10+ year member]

That sucks man. If it makes you feel any better, I have screwed in subs and forgot to hook up the wires. lol

 

[kpozr2 10+ year member]

try makin a box, then having everyone it was wrong. then rebuild it, then find out it was actually okay the 1st time.

 

[TwistedMovistar 10+ year member]

nall never, i lost the charger to my cordless drill so now i ran wires from it to connect straight to my battery in the car

 

[BASSMEKANIK 10+ year member]

my port is big and interchangeable so that would have been a simple thing to fix... i got ya beat, mine weighs in around 300 or so with subs and port //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif what are these 15's you speak of ?

 

[Flipx99 5,000+ posts]

I dropped a metal fence on a table saw and had shrapnel go into my face and chest. Very much pain, very much blood. But they were only flesh wounds. I finished what I was doing, using an exacto knife and tweezers to remove the most of the metal. My ex who was over nearly vomited. I still have some in me, but I can't get to it so it will just be there I suppose

 

[bamaboy 5,000+ posts]

what are these 15's you speak of ?

im guessing the CVr's in his ava

you should try lifting a MT when doing the cutout in a box, i almost was going to just leave it in there when it got stuck

i dont know about your box weighing 250lbs //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[bamaboy 5,000+ posts]

mine probably weighs close to 250 or more, i need to weigh it someday

 

[iamamp3pimp 5,000+ posts]

Mine weighs over 3

 

[bamaboy 5,000+ posts]

Mine weighs over 3

you has a wall you dont count:

 

[baseballer1100 5,000+ posts]

im guessing the CVr's in his ava
you should try lifting a MT when doing the cutout in a box, i almost was going to just leave it in there when it got stuck

i dont know about your box weighing 250lbs //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

Mts are too heavy..Well they are pretty loud though. well average. But they are really heavy so i guess they have to be loud.