solid amp for two 12w6's

[M@nJo 10+ year member]

running 2 12w6v2's (dual 4ohms) in a sealed box currently powered with a bxi1606d. im thinking of selling the amp to a local buddy and finally get a SOLID amp to power my subs. ive always owned hifonics and would like to try something 'better'. with a $300 budget, what would you recommend? must be 1ohm stable and 1000wrms.

Click to read more...

 

[bdawson72 5,000+ posts]

I dont kno if u can get alot better(something new that is) with 350 but u may be able 2 find something in the classifieds

 

[SlickCMRick 10+ year member]

http://cgi.ebay.com/Competition-Class-MonoBlock-Digital-Amplifier-OPTI1400D_W0QQitemZ9724717409QQihZ008QQcategoryZ18797QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item9724717409

 

[OneKrazyKeebler 10+ year member]

Funny how everyone dogs on audiobahn and recommends the opti amps.

I was on ampguts and the opti4000d had the same board as some audiobahn amp. I'll post the link in a minute

 

[OneKrazyKeebler 10+ year member]

http://ampguts.realmofexcursion.com/Lanzar_OPTI_4000D/

tripped me out anyway //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[OneKrazyKeebler 10+ year member]

I will sell you my v900hc for 300 shipped.

 

[asaner85 10+ year member]

Theres some guy on eBay selling NIB US amps MD1D for about $250. really good amps. Other than that. Its hard to find quality 1K amps for under $300.

 

[KLUVKUSTOMS 10+ year member]

SAX1500D

# 1500 x 1 watts @ 1 ohm

# 800 x 1 watts @ 2 ohms

# 400 x 1 watts @ 4 ohms

# 0.2v - 6v adjustable input sensitivity

# 10 Hz - 350 Hz Frequency Response

# >90 dB dB S/N Ratio

# 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current)

# Linkable to another SAZ-1500D for up to 3000 watts @ 2 ohms

# 35 Hz - 300 Hz adjustable 24dB Low-Pass Crossover

# 10 Hz - 60 Hz adjustable 24dB Subsonic Filter

# 0 - 180 degree adjustable phase shift

# 0 - 18 dB adjustable bass boost with 45 Hz center frequency

# Wired Remote Control unit included

# 4x 40 Amp Internal Fuses

# 17" L x 9" W x 2" H

# $599 US Dollars - MSRP

SAX100.2

# 100 x 2 watts @ 4 ohms

# 200 x 2 watts @ 2 ohms

# 400 x 1 watts @ 4 ohms

# Damping Factor > 350 @ 4 Ohms

# 0.2v - 6v adjustable input sensitivity

# 10 Hz - 40,000 Hz Frequency Response

# Channel Separations: 75 dB

# > 90 dB S/N Ratio

# 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current)

# Selectable HP / LP / FULL crossover

# 35 Hz - 300 Hz adjustable 18dB Low-Pass Crossover

# 75 Hz - 2,000 Hz adjustable 18dB High-Pass Crossover

# 0 - 18 dB adjustable bass boost with 45 Hz center frequency

# Wired Remote Control unit included

# 3x 20 Amp Internal Fuses

# 13 3/8" L x 9" W x 2" H

# $299 US Dollars - MSRP

Not sure if this helps but i try