Shared Enclosure Volume Gain?

bball09124
10+ year member

CarAudio.com Veteran
I was reading some stuff on the Soundpressure DD forums and some guy was talking about how if you use multiple subs in a common chamber you can calculate a 20% gain in air space. I've never heard this, is there any truth in it or is it some BS? Here's his exact quote.

"remember when do multible subs in common chamber you can caculate a 20% gain in precieved air space when they share a common chamber so if 1 sub uses 1cf 2 can be tuned the same in a 1.6 cf box and 4 can work in 3.0 so keep this in mind when doing multiable subs"

 
when multiple woofers are mounted in the same cavity keeping them with in the

voice coil diameter away from each other you get what is called a coupling effect

this can give up to a 6db gain in out put

 
when multiple woofers are mounted in the same cavity keeping them with in thevoice coil diameter away from each other you get what is called a coupling effect

this can give up to a 6db gain in out put
I've heard this, but it is not what I was referring to. I'm talking about enclosure volume, not output.

 
Any more input on this? I'm intrigued!

Thumper, When you say once vc diameter apart do you mean keeping the motors that close (ie mounting subs at an opposite angle) or from the edge of one basket to the other?

I did a little searching on this coupling effect, but mostly everything I see are complex pro audio designs using all kind of crazy mounting angles.

 
so tell me if im hearing right, if i put 2 subs in an enclosure sharing the same port/chamber its gonna be louder than 2 subs that are seperated? so this is one big box for 2 subs?

 
I was reading some stuff on the Soundpressure DD forums and some guy was talking about how if you use multiple subs in a common chamber you can calculate a 20% gain in air space. I've never heard this, is there any truth in it or is it some BS? Here's his exact quote.

"remember when do multible subs in common chamber you can caculate a 20% gain in precieved air space when they share a common chamber so if 1 sub uses 1cf 2 can be tuned the same in a 1.6 cf box and 4 can work in 3.0 so keep this in mind when doing multiable subs"
If that were true. Wouldn't tuning get thrown out the window as you added woofers to a ported application?
 
If that were true. Wouldn't tuning get thrown out the window as you added woofers to a ported application?
You would still tune the box same as you normally would, taking into account displacement of the port and speakers used.

 
so tell me if im hearing right, if i put 2 subs in an enclosure sharing the same port/chamber its gonna be louder than 2 subs that are seperated? so this is one big box for 2 subs?
No. What I am discussing is that if you run 2 subs in the same enclosure, you should shrink it 20% in order to see the same performance.

 
You would still tune the box same as you normally would, taking into account displacement of the port and speakers used.
I don't think you quite understood. When you add airspace the tuning frequency changes. Meaning you'd also need to modify the port to keep the same tuning ie, you can't drop the same 6" aero's in 4 ft^3 & 2 ft^3 & expect the same tuning frequency.So the question I propose. Is the port immune to this "perceived" airspace? If so how do the subs get so lucky?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bball09124

10+ year member
CarAudio.com Veteran
Thread starter
bball09124
Joined
Location
psl, fl
Start date
Participants
Who Replied
Replies
15
Views
1,623
Last reply date
Last reply from
BrianChia
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top