sealing off my trunk??

[basscort2009 5,000+ posts]

then get peel n seal from lowes instead of dynomat. its wayyyy cheaper and the same thing! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[zack1442 10+ year member]

if you put a complete piece of ply or mdf w/e against the opening in the front (cabin/trunk) your trunk would essentialy be sealed, you would have to foam/tape etc around the edges of the wood obviously. so then you would cut out the opening of your box into that wall and seal around that. why are you wanting to do something with anything behind the box if its firing into the cabin. maybe i mis understood something?

even tho its sealed off from the cabin there is still sound waves traveling through the trunk that is gonna rattle the shit out of it, so id like to stuff the trunk completely to keep that from happening

 

[zack1442 10+ year member]

then get peel n seal from lowes instead of dynomat. its wayyyy cheaper and the same thing! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i will have to look into this lol

 

[kyleorsini 10+ year member]

even tho its sealed off from the cabin there is still sound waves traveling through the trunk that is gonna rattle the shit out of it, so id like to stuff the trunk completely to keep that from happening

then it wouldnt be sealed properly if sound waves were coming back into the "sealed" trunk.

 

[zack1442 10+ year member]

sound waves from a subwoofer dont move in one motion..and just because u block the front of the box from the back dont mean there is not sound traveling to the back still..

 

[blackbonnie 5,000+ posts]

how will the sound travel backwards when your box is enclosed. if you seal off the front of the box, so no air from the cabin can get to the trunk, then you will have it completely sealed off and your rattles are gone.

the only rattles you would get would be from the box vibrating and causing your trunk to vibrate.

but if your box is braced and mounted properly then everything fine

 

[kyleorsini 10+ year member]

how will the sound travel backwards when your box is enclosed. if you seal off the front of the box, so no air from the cabin can get to the trunk, then you will have it completely sealed off and your rattles are gone.
the only rattles you would get would be from the box vibrating and causing your trunk to vibrate.

but if your box is braced and mounted properly then everything fine

thats what i thought.

 

[zack1442 10+ year member]

thats what i thought.

yes vibrations, sound waves cause vibrations...i know it will seal off the air...the point is i dont want vibrations in the trunk

 

[Alpine4life89 10+ year member]

i have my subs sealed off and the vibration of the sub enclosure creates the trunk to still rattle a bit, but it is the best thing i have ever done to my system. Plus, i have done tests and you will likely lose no SPL by doing this.

 

[blackbonnie 5,000+ posts]

brace your box properly and you wont have vibrations //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[zack1442 10+ year member]

i have my subs sealed off and the vibration of the sub enclosure creates the trunk to still rattle a bit, but it is the best thing i have ever done to my system. Plus, i have done tests and you will likely lose no SPL by doing this.

i know what it sounds like sealed off, ive already dont that..i just wanted opinions on doing it differently...and u still should port the rs

 

[mlstrass 5,000+ posts]

This is how I did it with my old set up:

http://www.caraudio.com/forum/showthread.php?t=242099&page=3

 

[Pioneer~Saturn 5,000+ posts]

Yea man, foaming the living crap out of your car will add almost no weight at all

 

[zack1442 10+ year member]

This is how I did it with my old set up:
http://www.caraudio.com/forum/showthread.php?t=242099&page=3

that would be nice to do, how much would that cost to do

 

[mlstrass 5,000+ posts]

that would be nice to do, how much would that cost to do

sent you a PM...