sealed enclosure help

[infamous_e46 5,000+ posts]

i am building a temp box for my four credence tens

my max width is 29 inches and max height 14 inches and 22 length from front to back

so how many cubes would that be sealed including sub displacement....or is it big enough to aeroport it =p

or if you can recommend a better set of measurements or design to get .5 cubes per sub within those meaurements

thanks in advance guys

Click to read more...

 

[Scoobydoo 5,000+ posts]

you seriously dont know how to calculate that?

29x14x22=x

then

x/1728

but....

how thick is the wood?

what is the sub displacement?

 

[IDSkoT 5,000+ posts]

if you're using 3/4" MDF (which is what's always recommended)

((29-(.75*2)x(14-(.75*2)x(22-(.75*2))/1728 = 4.07 CuFt.

Depends on your subs and the frequency you want.

 

[infamous_e46 5,000+ posts]

3/4 inch mdf

and sub mounting depth is about 5 1\2 inches

thanks in advance guys

 

[infamous_e46 5,000+ posts]

who wants to poast new pix of my subs =p

and if i do a ported box i was going for 32hz

but im thinking i only have supplies for sealed i mean im broke and the only port i have is 4inches by 5inch long

so does anyone have a design and cut sheet for .5 or .6 cf for each of my four 10's within my max measurments

thanks in advance guys

 

[infamous_e46 5,000+ posts]

i am willing to port if pvc can be used and you guys provide instructions hahaha =p

 

[Scoobydoo 5,000+ posts]

mounting depth means nothing to sub displacement

 

[infamous_e46 5,000+ posts]

**** i posted the specs in my credence subs arrived thread

 

[infamous_e46 5,000+ posts]

help guys ill give you napa gold filters

 

[infamous_e46 5,000+ posts]

anyone ???

 

[Pioneer~Saturn 5,000+ posts]

I might be able to whip sumfin up for ya //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[406er 10+ year member]

http://reaudio.com/speaker_box/LPort_Box_Calc.html

USE IT

 

[Pioneer~Saturn 5,000+ posts]

PM'd //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[2006xplorXLT]

That RE Enclosure Calculator site is nice, but it seems to only give accurate measurements for ported/vented boxes, not sealed boxes? I enter 0 for all the port info it'd let me and I still get measurements like: Right Plate: 8.5 x 16.5 x 8.5 x 16.5 Left Plate: 9.25 x 16.5 x 9.25 x 16.5

This is on a box that is 41x18x10.... I understand the 9.25 but the 8.5 and the fact that it stil shows a little port on the size (albeit 0), makes me assume it must still be factoring the vent into the equation.....

Is there a site like this for sealed boxes?

 

[infamous_e46 5,000+ posts]

might use the re box builder if i can score some more mdf