SAZ-1500D V2 is a monoblock?

[Patthehat033 10+ year member]

How is it a monoblock? It looks like it has 2 channels in the pictures?

How do I wire it to 1 ohm if there are 2 channels?

Click to read more...

 

[infamous_e46 5,000+ posts]

Kill yourself

 

[LosIsATool 5,000+ posts]

Yes. they are linked internaly for easy of wiring multible woofers....

Now go kill yourself

 

[Patthehat033 10+ year member]

Kill yourself

I just stuck my tongue across both terminals of my car battery. But really haha I am confused.

 

[skitzafit 10+ year member]

//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[Spooney 10+ year member]

This is one of the most understood subjects by noobs ever. It has two sets of outputs for ease of wiring and nothing more. Think of the positives as one buss bar and the negatives as another. Both positive terminals are connected together internally and both negatives are connected together internally. The thing that really matters is that you get your subs wired correctly. This is what is going to dictate your nominal impedance/ohm load

 

[infamous_e46 5,000+ posts]

They are internally bridged it IS just one channel

Just two terminals for ease of wiring multiple subs and thanks for being humerous and not getting mad welcome to the forum

 

[skitzafit 10+ year member]

Sundown Amplifier FAQ - SSA Car Audio Forum

8) Why are there two pairs of connections on the mono-block Class-D amps? How do I bridge them? - 4/21/08

You do not bridge them, it is a mono-block amplifier.

The connectors are in parallel inside the amp. If you hook 4 ohms to each one, you get two ohms. If you hook 2 ohms to each one, you get one ohm.

They are also there for strapping the amps, as pictured above.

 

[Patthehat033 10+ year member]

So then theoretically if I wire up 2 dvc 4 ohm subs to 1 ohm and then wire the subs into both outputs for 1500 watts?

 

[Patthehat033 10+ year member]

Oh crap so then if I hook 2 ohms to each output I get 1 ohm?

 

[J31Rob 5,000+ posts]

:facepalm:

 

---------- Post added at 08:39 PM ---------- Previous post was at 08:39 PM ----------

 

Sundown Amplifier FAQ - SSA Car Audio Forum
8) Why are there two pairs of connections on the mono-block Class-D amps? How do I bridge them? - 4/21/08

You do not bridge them, it is a mono-block amplifier.

The connectors are in parallel inside the amp. If you hook 4 ohms to each one, you get two ohms. If you hook 2 ohms to each one, you get one ohm.

They are also there for strapping the amps, as pictured above.

Oh crap so then if I hook 2 ohms to each output I get 1 ohm?

Read.

 

[Rich B 5,000+ posts]

rtfm

 

[ThatChevyGuy 5,000+ posts]

Read The F'ing Manual?

 

[itsblown 10+ year member]

poor troll is poor?

 

[Patthehat033 10+ year member]

Haha I understand how it works now, thanks guys! I was confused since the smaller amps are not wired together as a monoblock on the inside. But hey now I know! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif