RyanM923's 21" Autotek Build...

[RAM_Designs 5,000+ posts]

And there's also a couple of 45's on the front corners as well...one just to the left of the sub, and another on the back side of the port like in the original diagram.

 

[bumpin buick 5,000+ posts]

wait that sub is a d1? i thought it was a d2?

 

[jmanpc 5,000+ posts]

That pic makes the beer look really small.

 

[bball09124 10+ year member]

bracing looks horrid, should've went with threaded rod or dowels. i would've gone bigger on the 45's too. i would be very surprised if this comes close to a 150, if i had to guess i'd say itll do around a 145.

hopefully you will prove me wrong.

 

[RAM_Designs 5,000+ posts]

wait that sub is a d1? i thought it was a d2?

the last 11 in XS-2111 stands for the coil configuration. I haven't checked it with a DMM yet, but I haven't seen anywhere that says it's supposed to be D2.

 

[RAM_Designs 5,000+ posts]

bracing looks horrid, should've went with threaded rod or dowels. i would've gone bigger on the 45's too. i would be very surprised if this comes close to a 150, if i had to guess i'd say itll do around a 145.
hopefully you will prove me wrong.

I'll be going with dowels if I have any issues with these. I didn't want to spend any money on this box, and I didn't //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

I'm doing a 147 right now with the MJ's, and this models out to be 4.5-5db louder where I burp at, so 150 is definitely a possibility, although a hard one to reach.

 

[stuckinok 5,000+ posts]

Double baffle is overrated. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I looked at the xmax graph on winISD and it won't be moving more than .5" at the frequency I'm playing. Not to mention it's not a terribly heavy sub and it doesn't have a lot of xmax(just a little over an inch p2p).
I also did a single baffle on my three MJ-18's and have had no flex issues...

I agree. A lot of people on here do double even triple for no reason Using wooden dowels correctly should brace it properly. The strength to weight ratio for doublig up isnt worth it to me, but hey we all have our own methods. Plus Iam no SPL pro in anyway.

Nice build Ryan!

 

[MikeyB 5,000+ posts]

Nice! I want vidzzzzzzz

 

[RAM_Designs 5,000+ posts]

Nice! I want vidzzzzzzz

I'll get a snapshot of my score this sunday, vids of this wouldn't be too impressive since it's no xmax monster...

 

[MikeyB 5,000+ posts]

^^^ Do it do it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I would still like to see the sucker jumpin around a tad //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[maldecido33 10+ year member]

I have the same shirt as your profile picture //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[RAM_Designs 5,000+ posts]

I have the same shirt as your profile picture //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

The UNT one or my girlfriend's Mavs one? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[maldecido33 10+ year member]

The UNT one or my girlfriend's Mavs one? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

UNT; I went there for a semester.

 

[maldecido33 10+ year member]

Go Mean Green.

 

[RAM_Designs 5,000+ posts]

UNT; I went there for a semester.

Why'd you leave? Wanted to go closer to home?