RL-p 15

[hdave 10+ year member]

where can i find one in my pricerange?

 

[ANeonRider 10+ year member]

How much space do you need for a SX 15 though? Definately more than 3 ft^3.

 

[hdave 10+ year member]

yea thats wat i was thinking.

i have 3 cubes and 700rms to work with only.

my budget isnt that big either.

 

[jellyfish420 10+ year member]

How much space do you need for a SX 15 though? Definately more than 3 ft^3.

4ft^3@34Hz

 

[ANeonRider 10+ year member]

4ft^3@34Hz

That is really not that bad at all for 2 15's. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[hdave 10+ year member]

i thought that space is for 1 15" SX

its for 2?

if thats for two. then how much u need for one 15" sx?

 

[ANeonRider 10+ year member]

That's for 2 RL-p's. I am not sure how much SX's would take, but I am under the impression they like lots of room.

 

[BoominBeast]

Nope a 15 SX can perfom in 2.3-3.5 and gets loud.

did you check out the videos

next to each videois the enclousure saize. Man, pay attention, im just tryin to help.

you can run the SX with a bx1000 which you can get for less than 200. so you all set.

An sx runs around the range of $230.

http://www.realmofexcursion.com/brands/reaudio.htm

go to the link to check out RE SX vids and the boxes they run in.

 

[jellyfish420 10+ year member]

That is really not that bad at all for 2 15's. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

no thats just 1 SX //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif the RL-p's recommend 2.5-3.5ft^3

i've got my 2 cramed in 5ft^3@34Hzw/70in^2 port. i would of really liked to go bigger, tuned lower, and more port...but hey what can you do when you drive a little car? //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[jellyfish420 10+ year member]

Nope a 15 SX can perfom in 2.3-3.5 and gets loud.
did you check out the videos

next to each videois the enclousure saize. Man, pay attention, im just tryin to help.

you can run the SX with a bx1000 which you can get for less than 200. so you all set.

An sx runs around the range of $230.

http://www.realmofexcursion.com/brands/reaudio.htm

go to the link to check out RE SX vids and the boxes they run in.

http://www.realmofexcursion.com/videos/Resonant%20Engineering/sx15.8.wmv

i'm not sure how my hybrid would compare to an sx(although it is half sx) but i was running it in a 3.2ft^3 box with 1400w, and it sounded pretty good....but i wish i would of went with 4ft like david suggested //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

i'm mean hey this guy makes the sub...i bet he knows a little about them //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[JimJ 5,000+ posts]

this is what the builder of my box used for his SX //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

but it's not a ported enclosure, so it doesn't really apply here.

 

[hdave 10+ year member]

my problem is that i only have 700rms and 3 cubes to work with.

can a Treo SSi 15 d2 do the trick?

 

[Nukedsodapop 5,000+ posts]

Hey Aneonrider, what subs are those in your avatar?

The Only way i would like those Rl-p's is if they could somehow leave the label off the front, cause i like it plain and simple, it just looks better imo...

Thats what it looked like anyway

Blake

 

[teds147 10+ year member]

Id go with the SoundSplinter if I were in your position, if you have 700 rms the Splinter might take the SX out in SPL because the SX likes a little more power than the Splinter. Also the soundsplinter's SQ is on par with an XXX, it uses the TC9 motor and is very similar to TC sounds TC9 line. You might not care too much about SQ but why get a sub that sounds quite worst, for the same price range when you only will be gaining possibly a decible if even anything.

 

[jellyfish420 10+ year member]

Hey Aneonrider, what subs are those in your avatar?The Only way i would like those Rl-p's is if they could somehow leave the label off the front, cause i like it plain and simple, it just looks better imo...

Thats what it looked like anyway

Blake

the subs in neon's avatar is the RL-p. he got one of the last logoless ones. mike @ soundsplinter was gonna have me 2 logoless 15's made but i came across a helluva deal on two w/ logos before soundsplinter got them back in stock. besides...look at my avatar! cant see the logo anyway

edit:just in case my avatar is kinda hard to see.....