Reconing and YOU w/ Mr. Jizm Man & EhRon v. nG's custom woofage...

[PESteele 10+ year member]

how much did the recone cost

 

[ngsm13 5,000+ posts]

how much did the recone cost

Some money.

You'll have to contact RE on that.

nG

 

[PESteele 10+ year member]

did u get like illegal pricing or something

 

[cameronp 10+ year member]

u didnt show how u got the speaker off the basket my re sx needs a recone n i cant get the surround off to pull it out do i jus have to just pull it up then scrape the glue off

 

[ngsm13 5,000+ posts]

u didnt show how u got the speaker off the basket my re sx needs a recone n i cant get the surround off to pull it out do i jus have to just pull it up then scrape the glue off

If it needs a recone, take a utility knife and cut the **** out. Cut around the surround as close to the landing as possible... same thing with the spider landing. Cut the tinsels... and rip the entire assembly out.

The, take a putty knife and a rubber hammer to chisel off the spider left on the landing and the surround on the landing. After that sand both landings down so the remnants are gone.

Done //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

If changing sizes, you will need a P3 philips head and some torque to get the screws out of the motor/basket. I recommend using goop or some type of epoxy to attatch the motor to the new basket. Then torque the screws back down.

This is where my thread picks up //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

nG

 

[cameronp 10+ year member]

ok im bout to pull it out n take pics n postem in here n u can sticky them

 

[PESteele 10+ year member]

i dont understand what it means to shim it to align the voice coil can someone please explain

 

[ngsm13 5,000+ posts]

i dont understand what it means to shim it to align the voice coil can someone please explain

Basically, you use shims in the gap around the pole piece to give an equal thickness all around the former. You want it to be tight so the former doesn't wobble...

Yeah im kinda fdurnk1!

NG

 

[bigbassman Premium Member]

Basically, you use shims in the gap around the pole piece to give an equal thickness all around the former. You want it to be tight so the former doesn't wobble...
Yeah im kinda fdurnk1!

NG

man you(please)dunno nothin bout(teach) peeka buildin(me) foo.... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Loyd L.

 

[ngsm13 5,000+ posts]

man you(please)dunno nothin bout(teach) peeka buildin(me) foo.... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Loyd L.

Hehehe, you're clueless right? Loyd knows nothing //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif ??

At least it was a half coherent post for being kind of drunk.

Glad you're back foo //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif...

nG

 

[60ndown 10+ year member]

does the shim go inside or outside the coil?

edit, inside

 

[maldecido33 10+ year member]

care to give a list on where to buy the CA glue/necessary things?

i've got a 12" ava i have no need for that i may recone for the hell of it.

 

[iamamp3pimp 5,000+ posts]

sell it and buy a moofer motor

 

[Dread]

respect doodnice work!

 

[Justintoxicated 10+ year member]

Wow that looks pretty simple, need to be careful, makes me wonder why subs are so **** expensive.