recone glue

[bose301s 5,000+ posts]

loctite 410 or 411c. also some comps. use loctite 418.

http://www.loctite.com/int_henkel/loctite_us/index.cfm?&pageid=19&layout=3 http://www.loctite.com/int_henkel/loctite_us/index.cfm?&pageid=19&layout=3

Are those them?

 

[snoopdan 5,000+ posts]

I use BSI IC-2000 black CA

http://www.bsiadhesives.com/Pages/hobby/ca.html

 

[02parkave 5,000+ posts]

http://www.loctite.com/int_henkel/loctite_us/index.cfm?&pageid=19&layout=3 http://www.loctite.com/int_henkel/loctite_us/index.cfm?&pageid=19&layout=3
Are those them?

just go to mcmaster carr and type that stuff in.. will get you what you need)

 

[bose301s 5,000+ posts]

just go to mcmaster carr and type that stuff in.. will get you what you need)

Hmm, pretty expensive stuff. How much does one need to do a recone on a 12" sub properly?

 

[lilmaniac2 5,000+ posts]

2 oz

 

[bose301s 5,000+ posts]

2 oz

Hmm, thats over $60 just in glue, lol.

 

[Q&A 10+ year member]

That IC-2000 looks similar to the rubber toughened Loctite Ca, very strong stuff.

 

[tommyk90 5,000+ posts]

I also use IC-2000. I get it at a local hobby store and it works just fine.

For shimming i would use thin sheets of paper so you make sure you get the coil centered properly. Using something thick like a manilla folder may not get the gap as tight as it needs to be.

 

[AlanHall 10+ year member]

we have been using the devcon 5min epoxy pt# 20445 from walmart ..homedepot..etc ..for ever..its the only devcon cleaer 5min with the twisty tips in the package ive ever seen..its 2.36 a pack from walmart...never had it fail yet...as with CA..thats a diff story...

 

[sundownz Pro Seller]

I've used alot of 5-minute epoxy (DevCon) and it worked well on everything but a Shocker sig -- it blew the spider right off almost immediatly. I did XXXs, Mags, and several other misc subs with it no problem.

Even stronger is this stuff with "Fusion" written on it that I got at the craft store... one part and clear, strong as hell. It help the Sig spider on quite nicely. It does take 24 hours to dry, though.

I have some other stuff that I bought direct from a glue manufacturer that I'm using now... it's black and somewhat flexible, much like (or maybe the same as) what DD uses. It also takes quite a while to dry, but I like the results.