reccommend me a sub, 750-900 watts RMS 1-2ohms

[bretthiltz 10+ year member]

Okay, I have a Kicker zx750.1 amplifier that I plan to use to drive a subwoofer. It puts out 375wrms at 4 ohms, 750wrms at 2 ohms and like 950wrms at 1 ohms.

I was looking at subs and wanted to get a w7 but I can't power it with this amplifier because it's a SVC 3 ohm subwoofer. The W6's though, are DVC 4 ohms which mean I can wire it in parallel and push about 750wrms to it, correct?

Or, recommend me the best subwoofer, in SPL and SQ that I could efficiently power with my amplifier.

Click to read more...

 

[thevic24 5,000+ posts]

You could use that amp to drive a W7....

you would get +/- 500 watts or so

As far as a "best" sub, that is all a matter of opinion.

 

[LosIsATool 5,000+ posts]

The ZX series are not 1 ohm stable

 

[infamous_e46 5,000+ posts]

ill sell you my eclipse titanium 15" it is dual 4ohm ohm so u can run it at 2ohm

 

[ChevyRidinLow]

Okay, I have a Kicker zx750.1 amplifier that I plan to use to drive a subwoofer. It puts out 375wrms at 4 ohms, 750wrms at 2 ohms and like 950wrms at 1 ohms.
I was looking at subs and wanted to get a w7 but I can't power it with this amplifier because it's a SVC 3 ohm subwoofer. The W6's though, are DVC 4 ohms which mean I can wire it in parallel and push about 750wrms to it, correct?

Or, recommend me the best subwoofer, in SPL and SQ that I could efficiently power with my amplifier.

dont touch jl unless u rnt picky abt volume. id reccommend a skar. itll b under 200 from the ssa store online or find one on the classifieds. itll like that amount of power, they get low loud and have good sq.

 

[Bettr n' Revrse 5,000+ posts]

Yes the ZX series are not 1 ohm stable but you may look into the DD line...

 

[bretthiltz 10+ year member]

Weird I could of sworn they were stable at 1 ohms. And after looking at jl's pdf, the W6 is a dual 4 ohm sub but can only be ran in 3 ohms for parallel or 12w6 for series. Gay.

I'd like a loud sub with good sq. Let's hear everyone's opinions.

I have 750 watts RMS at 2 ohms then.

 

[Kangaroux 5,000+ posts]

SA-12, DD 2512, Skar, DC lvl3, pair of dcon's, icon, IA lethal injection

 

[09civic 5,000+ posts]

too many options op

 

[Imtjnotu 5,000+ posts]

Skar

 

[09civic 5,000+ posts]

Skar

shad up

 

[bretthiltz 10+ year member]

It's going to be in a sealed box if that makes any difference either.

 

[Kangaroux 5,000+ posts]

how many subs do you want to run? i would do a single beefy sub in a ported box over 2 meh subs in sealed.

 

[bretthiltz 10+ year member]

I only wanna run one. I do wanna run one beefy one. Why ported? It won't hit as hard then, will it?

 

[slim2fattycake 10+ year member]

12" W7 with a bigger gap top plate for the Fi Q coils and soft parts. Dual 2 ohm so you can wire it at 1 ohm or 4 ohm. PM me if you're interested.