RCA problem

[chrisw91 10+ year member]

k, im going to try this again. after taking my system out, then putting it back it, it now doesnt get loud at all. with both RCA's plugged in the subs arnt loud, with just one plugged in its a bit louder, but not nearly as loud as before. and maybe a clue, when i was playing some music, the amp went into protect, saying over current. and this may sound stupid, but on one of my bass tester tracks the subs are perfectly loud like before, but any other track, they just dont work. any ideas?

Click to read more...

 

[shaneb 10+ year member]

Subs are wired out of phase in relation to eachother. Make sure they are wired right.

Sounds like cancellation if it gets louder when you unplug a rca.

 

[chrisw91 10+ year member]

or could it be one of them got unplugged? well they all work, and i never took them out of the box, and they were wired correctly before.

 

[chrisw91 10+ year member]

bump

 

[chrisw91 10+ year member]

just tweaked on it a bit again, and found something. i played a 50hz test tone on them and it was just fine as well. are the test tones mono as opposed to stereo? because the bass tester track, and 50hz track both sounded normal. but any song and they arnt loud.

 

[chrisw91 10+ year member]

still need some help on this. if anyone can help.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif