Radio Shuts off and will not work untill fuse is pulled

[briarfox]

Hey Guys, I'm having a problem that is driving me absolutely nuts. My car radio will work fine until I shut my car off for more then 5 min. When I get back in the radio will get no power. I have to disconnect the battery or pull the fuse out to get it working again. It will continue to work until i shut off the car again.

2007 Jeep Patriot

Peripheral Chrysler Radio Replacement Interface model CHYAH05

Kenwood KDC-BT838U

Any advise would be greatly appreciated.

Thanks

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

put a toggle switch on your red wire to deck if that don't work do the yellow wire

 

[Louisiana_CRX 5,000+ posts]

most likely your lan box or what ever its called is defective

 

[briarfox]

Thanks for the reply

What is the lan box?

I've been thinking about using a toggle but that would mean a complete radio reset everytime I drive //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif I'm guessing I should pull it apart with the batt connected and start pulling plugs starting at the radio and see what turns it back on.