Quick Vs Thread

[JoseMCeee 10+ year member]

If you can't fit it based on height, you can angle the front baffle and definately be able to fit in a 15" height wise.

confused on what u mean... Do u mean make the entire box a wedge?

 

[JoseMCeee 10+ year member]

well i made some more measurements recently and everything looks like it would fine perfectly. The only think that might be a tight fit is put the box into the trunk. But after its in, theres plenty of space everywhere. Right now the box i have is 28 wide so it would be about that width. Then the box is pushed towards the rear a bit so thats 7 inches plus the 12.5 inches the box already is. So I could do 19 inches deep if i wanted. I will probably just go with 16 tho. All those specs would give me about 2.5 cuft NET after driver displacement.

Sounds like a plan but I dont know if it will be worth upgrading to a 15 from 2 10s. Probably will tho //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[justsayk 10+ year member]

the 15 will have more cone area that the two tens and if you're going with something like the elite its going to have a lot more excursion than what you're got now, so it will most likely be a fair amount louder.