quick amp question

[hansk 10+ year member]

what would you do ...i wanna stick to hifonics

just wondering if this will work..

hifonics ZXI4410

RMS power output: 4 X110 W @2 ohm

or

Hifonics ZXi3406

RMS @ 2-ohm: 4 x 75 watts

looking to power a set of Alpine SPR-17S plus 2 coaxial speakers

alpine are power ratings are:

RMS power range:110 W

Peak power handling: 330

Click to read more...

 

[Buck 5,000+ posts]

Ya should work. But why stick with hifonics?

 

[hansk 10+ year member]

Ya should work. But why stick with hifonics?

cause i just bought a hifonics brutus BXI 2010D 2000 Watts rms for some kicker L7 and i wanna too same brand amp... and i think hifonics is pretty good for value

but which one would u do or would either one work

 

[Buck 5,000+ posts]

Either would work but if you can afford the extra power then I would go ahead and do that.

 

[hansk 10+ year member]

Either would work but if you can afford the extra power then I would go ahead and do that.

ok thanks for the info

 

[Buck 5,000+ posts]

Wait, those rms ratings are at 2 ohms. Your speakers are at 4 ohms. That means you will be seeing less power than what you posted up.

 

[hansk 10+ year member]

they are component speaker the discription doesnt say anything about ohms

 

[hansk 10+ year member]

Technical Specification

Sensitivity: 87 dB

RMS Power Range : 110 Watts

Peak Power Handling: 330 Watts

Frequency response: 65-27000 Hz

Diameter: 6.5 Inch

Features

6-1/2" Coaxial 2-Way Speaker

Linear Drive Magnet

Hybrid layered-pulp with mica coating woofer cone

Multi-Layer Cone

Square Voice Coil Design

Large size Voice Coil

Roll Rubber Surround

1" Ring-Dome Tweeter

Swivel Design

OEM Mount Installation Capability

Crossover Network

7-Level Tweeter Adjustment

Custom-Fit Adaptor Included

6"x8" Adaptor

Priced per pair

Component speakers are usually sold as a pair unless otherwise noted.

Warranty: Limited 30 Day Onlinecarstereo.com warranty.

Limited 30 Day warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties.

 

[hansk 10+ year member]

amp SPECS

Technical Specification

RMS Power Range : 4x110 Watts

Number Of Channels: 4

Built In Crossovers: Yes

Channel Separation: Yes

Features

RMS Power Output: 4 x 55 W @ 4 Ohms

RMS Power Output: 4 x 110 W @ 2 Ohms

RMS Power Output: 2 x 220 W @ 4 Ohms

Parametric bass EQ with 45Hz bass boost and variable control from 0d to 10db

Variable Low Pass, High Pass/Subsonic Filter, Phase Shift and Level Control

Crossover Selector for easy High Pass, Full Range or Low Pass operation

Built-in system diagnostics protects from short circuits, over load, thermal over-heat and DC offset

Dimensions 12.6" x 2.56" x 9.45"

Warranty: 1 Year Onlinecarstereo.com warranty.

1 Year warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties.

 

[Buck 5,000+ posts]

they are component speaker the discription doesnt say anything about ohms

It is probably 4 ohms. I think you need to look at a different amp. The amp needs to be around 100 @ 4 ohms, not at 2 ohms.

 

[hansk 10+ year member]

well what would you do with hifonics

 

[Buck 5,000+ posts]

well what would you do with hifonics

What do you mean?

 

[hansk 10+ year member]

what amp would you go with to power those alpine(spec are above) and my cheap JVC co-ax i wanna stay with hifonics